This PDF file contains the front matter associated with SPIE Proceedings Volume 10698 including the Title Page, Copyright information, Table of Contents, Introduction (if any), and Conference Committee listing.

The James Webb Space Telescope (JWST) is a NASA flagship mission that will address multiple science themes including our Universe’s first light, the assembly of galaxies, the birth of stars and planetary systems, and planets and the origins of life. The JWST is a large (6.5 m) segmented aperture telescope equipped with near- and mid-infrared instruments (0.6-28 microns), all of which are passively cooled to ~40 K by a 5-layer sunshield while the mid-infrared instrument is actively cooled to 7 K. The JWST will be launched to an L2 orbit aboard a European Space Agency (ESA) supplied Ariane 5 rocket, whose payload volume constraints require that the JWST structure is stowed for launch. The JWST telescope recently completed its cryogenic test program and the sunshield has been fully integrated and deployed. JWST is currently in the final stages of the test program at the Observatory level. The current estimated JWST performance metrics will be presented, such as the image quality, pointing stability, sensitivity, and stray light backgrounds. The JWST development status and future plans will be described for the final testing, launch, and commissioning. JWST is an international project with contributions from NASA, ESA, and the Canadian Space Agency (CSA). Northrop Grumman Aerospace Systems is the prime contractor for the JWST, and the Space Telescope Science Institute will serve as the science operations center.

The James Webb Space Telescope (JWST) primary mirror (PM) is 6.6 m in diameter and consists of 18 hexagonal segments, each 1.5 m point-to-point. Each segment has a 6 degree-of-freedom hexapod actuation system and a radius-of-curvature (ROC) actuation system. The full telescope was tested at its cryogenic operating temperature at Johnson Space Center (JSC) in 2017. This testing included center-of-curvature measurements of the PM wavefront error using the Center-of-Curvature Optical Assembly (COCOA), along with the Absolute Distance Meter Assembly (ADMA). The COCOA included an interferometer, a reflective null, an interferometer-null calibration system, coarse and fine alignment systems, and two displacement measuring interferometer systems. A multiple-wavelength interferometer was used to enable alignment and phasing of the PM segments. By combining measurements at two laser wavelengths, synthetic wavelengths up to 15 mm could be achieved, allowing mirror segments with millimeter-level piston errors to be phased to the nanometer level. The ADMA was used to measure and set the spacing between the PM and the focus of the COCOA null (i.e., the PM center-of-curvature) for determination of the ROC. This paper describes the COCOA, the PM test setup, the testing performed, the test results, and the performance of the COCOA in aligning and phasing the PM segments and measuring the final PM wavefront error.

The James Webb Space Telescope is a large space-based astronomical telescope that will operate at cryogenic temperatures. Because of its size, the telescope must be stowed in an inoperable configuration for launch and remotely reconfigured in space to meet the operational requirements using active Wave Front Sensing and Control (WFSC). Predicting optical performance for the flight system relies on a sequence of incremental tests and analyses that has culminated with the cryogenic vacuum test of the integrated Optical Telescope Element (OTE) and Integrated Science Instrument Module (ISIM) referred to as OTIS. The interplay between the optical budgeting process, test verification results at incrementally increasing levels of integration, use of test validated models, and the WFSC process to produce the final optical performance predictions for final verification by analysis will be presented.

In 2017, the James Webb Space Telescope Optical Telescope Element and Integrated Science Instrument Module (OTIS) underwent cryogenic optical testing at the Johnson Space Center. In this paper, we summarize the successful execution and results of this 100-day test, which was a major program milestone. We summarize the as-run test configuration and provide a top-level as-run timeline. We also provide the top-level functional, optical, thermal, and operational results from the test. We summarize the key technical issues encountered and the resolution of those issues. The results of the OTIS test indicate that the payload should be fully capable of delivering on JWST’s exciting scientific potential.

This paper describes the construction and application of an integrated optomechanical raytrace model used for optical analysis support of the OTIS cryo-vacuum test of the James Webb Space Telescope (JWST) test campaign. OTIS is the Optical Telescope Element (OTE) and Integrated Science Instrument Module (ISIM). Four specific applications are described – 1) simulation of ambient over-lighting conditions from clean room luminaires and photogrammetry flashes, 2) PSF image motion predictions in the presence of auto-collimating flat (ACF) actuation, 3) science instrument field illumination (“shadowgrams”) checking for unexpected vignetting, and 4) pupil alignment simulations of the Near Infrared Imager and Slitless Spectrograph (NIRISS).

The James Webb Space Telescope (JWST) is frequently referred to as the follow-on mission to the Hubble Space Telescope (HST). The “Webb”, as it is often called, will be the biggest space telescope ever built and it will lead to astounding scientific breakthroughs. The observatory is currently scheduled for launch in 2020 from Kourou, French Guyana by an ESA provided Ariane 5 rocket. The Observatory houses four scientific instruments. One of them is NIRSpec, the multi-object Near Infrared Spectrograph, built for ESA by Airbus Defence and Space in Germany. After the JWST Optical telescope Element (OTE) integration and testing was completed in early 2016, the Integrated Science Instruments Module (ISIM) was integrated to the OTE in May 2016. The complete system of OTE and ISIM, now called OTIS, then successfully went through an acoustic and vibration test campaign at NASA Goddard Space Flight Center (GSFC). After this, the OTIS system was shipped to the Johnson Space Center (JSC) in Houston, TX, where a final 100+ days lasting cryogenic vacuum test was conducted inside the famous Thermal Chamber A. This paper presents NIRSpec’s hardware status and some preliminary test results from the OTIS test campaign.

The James Webb Space Telescope (JWST) telescope’s Secondary Mirror Assembly (SMA) and eighteen Primary Mirror Segment Assemblies (PMSAs) are each actively controlled in rigid body position via six hexapod actuators. Each of the PMSAs additionally has a radius of curvature actuator. The mirrors are stowed to the mirror support structure to survive the launch environment and then must be deployed 12.5 mm to reach the nominally deployed position before the Wavefront Sensing & Control (WFSC) alignment and phasing process begins. JWST requires testing of the full optical system in a Cryogenic Vacuum (CV) environment before launch. The cryo vacuum test campaign was executed in Chamber A at the Johnson Space Center (JSC) in Houston Texas. The test campaign consisted of an ambient vacuum test, a cooldown test, a cryo stable test at 65 Kelvin, a warmup test, and finally a second ambient vacuum test. Part of that test campaign was the functional and performance testing of the hexapod actuators on the flight mirrors. This paper will describe the testing that was performed on all 132 hexapod and radius of curvature actuators. The test campaign first tests actuators individually then tested how the actuators perform in the hexapod system. Telemetry from flight sensors on the actuators and measurements from external metrology devices such as interferometers, photogrammetry systems and image analysis was used to demonstrate the performance of the JWST actuators. The mirror move commanding process was exercised extensively during the JSC CV test and many examples of accurately commanded moves occurred. The PMSA and SMA actuators performed extremely well during the JSC CV test, and we have demonstrated that the actuators are fully functional both at ambient and cryo temperatures and that the mirrors will go to their commanded positions with the accuracy needed to phase and align the telescope.

We update performance simulations and contrast predictions for JWST's coronagraphs based on the latest infor- mation on the as-built telescope and instrument properties, including both static and dynamic contributions to wavefront error. By combining optical modeling of the telescope, instruments and coronagraph optics along with STScI's rigorously-validated exposure time calculation engine, we develop updated contrast models including contributions from effects such as target acquisition residuals, stellar color differences, etc. We present assessments of the impact of wavefront error changes over time between science and PSF reference stars, using modeled wavefront drifts on various timescales based on available observatory structural/thermal/optical modeling and tested performance during the OTIS cryo test, extrapolated to on-orbit conditions. For NIRCam we explore tradeoffs between different occulting masks at a given wavelength. Between now and the start of Cycle 1 science, these and other updated simulations will enable the science community to prepare analysis tools and PSF subtraction software to hit the ground running with JWST coronagraphic observations.

Measurements in the infrared wavelength domain allow us to assess directly the physical state and energy balance of cool matter in space, thus enabling the detailed study of the various processes that govern the formation and early evolution of stars and planetary systems in the Milky Way and of galaxies over cosmic time. Previous infrared missions, from IRAS to Herschel, have revealed a great deal about the obscured Universe, but sensitivity has been limited because up to now it has not been possible to fly a telescope that is both large and cold. Such a facility is essential to address key astrophysical questions, especially concerning galaxy evolution and the development of planetary systems. SPICA is a mission concept aimed at taking the next step in mid- and far-infrared observational capability by combining a large and cold telescope with instruments employing state-of-the-art ultra-sensitive detectors. The mission concept foresees a 2.5-meter diameter telescope cooled to below 8 K. Rather than using liquid cryogen, a combination of passive cooling and mechanical coolers will be used to cool both the telescope and the instruments. With cooling not dependent on a limited cryogen supply, the mission lifetime can extend significantly beyond the required three years. The combination of low telescope background and instruments with state-of-the-art detectors means that SPICA can provide a huge advance on the capabilities of previous missions. The SPICA instrument complement offers spectral resolving power ranging from ~50 through 11000 in the 17-230 µm domain as well as ~28.000 spectroscopy between 12 and 18 µm. Additionally, SPICA will be capable of efficient 30-37 µm broad band mapping, and small field spectroscopic and polarimetric imaging in the 100-350 µm range. SPICA will enable far infrared spectroscopy with an unprecedented sensitivity of ~5x10-20 W/m2 (5σ/1hr) - at least two orders of magnitude improvement over what has been attained to date. With this exceptional leap in performance, new domains in infrared astronomy will become accessible, allowing us, for example, to unravel definitively galaxy evolution and metal production over cosmic time, to study dust formation and evolution from very early epochs onwards, and to trace the formation history of planetary systems.

We present an overview of the thermal and mechanical design of the Payload Module (PLM) of the next- generation infrared astronomy mission Space Infrared Telescope for Cosmology and Astrophysics (SPICA). The primary design goal of PLM is to cool the whole science assembly including a 2.5 m telescope and focal-plane instruments below 8 K. SPICA is thereby expected to have very low background conditions so that it can achieve unprecedented sensitivity in the mid- and far-infrared. PLM also provides the instruments with the 4.8 K and 1.8 K stages to cool their detectors. The SPICA cryogenic system combines passive, effective radiative cooling by multiple thermal shields and active cooling by a series of mechanical cryocoolers. The mechanical cryocoolers are required to provide 40 mW cooling power at 4.8 K and 10 mW at 1.8 K at End-of-Life (EoL). End-to-end performance of the SPICA cryocooler-chain from 300 K to 50 mK was demonstrated under the framework of the ESA CryoChain Core Technology Program (CC-CTP). In this paper, we focus on the recent progress of the thermal and mechanical design of SPICA PLM which is based on the SPICA mission proposal to ESA.

SMI (SPICA Mid-infrared Instrument) is one of the two focal-plane science instruments for SPICA. SMI is the Japanese led instrument proposed and managed by a nation-wide university consortium in Japan and planned to be developed in collaboration with Taiwan and the US. SMI covers the wavelength range from 12 to 36 μm with 4 separate channels: the low-resolution (R = 50-120) spectroscopy function for 17-36 μm, the broad-band (R = 5) imaging function at 34 μm, the mid-resolution (R = 1300-2300) spectroscopy function for 18-36 μm, and the high-resolution (R = 28000) spectroscopy function for 12-18 μm. In this paper, we show the results of our conceptual design and feasibility studies of SMI.

The techniques for stray light analysis, optimization and testing are described for two space telescopes that observe the solar corona: the Solar Orbiter Heliospheric Imager (SoloHI) that will fly on the ESA Solar Orbiter (SolO), and the Wide Field Imager for Solar Probe (WISPR) that will fly on the NASA Parker Solar Probe (PSP) mission. Imaging the solar corona is challenging, because the corona is six orders of magnitude dimmer than the Sun surface at the limb, and the coronal brightness continues to decrease to ten orders of magnitude below the Sun limb above 5° elongation from Sun center. The SoloHI and WISPR instruments are located behind their respective spacecraft heat shield. Each spacecraft heat shield does not block the instrument field of view above the solar limb, but will prevent direct sunlight entering the instrument aperture. To satisfy the instrument stray light attenuation required to observe the solar corona, an additional set of instrument baffles were designed and tested for successive diffraction of the heat shield diffracted light before entering the telescope entrance pupil. A semi empirical model of diffraction was used to design the baffles, and tests of the flight models were performed in flight like conditions with the aim of verifying the rejection of the design. Test data showed that the baffle systems behaved as expected. A second source of stray light is due to reflections of the sunlight off of the spacecraft structures and towards the instruments. This is especially the case for SoloHI where one of the spacecraft 8m tall solar arrays is located behind the telescope and reflects sunlight back onto the instrument baffles. The SoloHI baffle design had to be adjusted to mitigate that component, which was achieved by modifying their geometry and their optical coating. Laboratory tests of the flight model were performed. The test data were correlated with the predictions of a ray tracing model, which enabled the fine tuning of the model. Finally, end-to-end ray tracing was used to predict the stray light for the flight conditions.

Remote submm-wave spectrometers have the capability of providing statistically significant numbers of isotopic composition measurements within the budget constraints of available planetary missions. This talk will present a mission and instrument concept that would enable an accurate measurement of the D/H ratio on not one but several dozens of comets in a four-year mission lifetime. The instrument would utilize advanced cryogenic detectors that would allow us to measure the abundance of the para and ortho spin states of water and its isotopologues. State of the art superconducting heterodyne receivers have been developed that provide detection sensitivities approaching the quantum limit in the 500 GHz frequency range enabling the measurement of D/H ratio on around 50 comets from an observatory stationed for example at the thermally benign Lagrange point L2

We propose an innovative low-cost mission capable of detecting potentially habitable planets around a sample of solartype stars near the sun. The finding of rocky planets in temperate orbits among our immediate stellar neighbors will be a signature discovery. Our mission will deliver relative measurements of stellar position and motion at sub-micro arcsecond precision. These data, in turn, will reveal the presence of orbiting exoplanets. For the case of our primary targets Alpha Centauri A and B, objects below one Earth mass will be accessible when the end-of-mission astrometric precision requirement of 0.4 micro arcsecond is achieved. TOLIMAN will directly reveal the presence of sub-earth mass planets and constrain it orbit and mass This paper describes the optical and mechanical architecture of the mission, and first order instrument design. We also explain the instrument stability requirements imposed by the diffractive pupil post-processing calibration limitations. Our design baseline is a stable two-mirror telescope that images the field directly on CCD camera minimizing the number of reflections and optical components.

The Atmospheric Remote-Sensing Infrared Exoplanet Large-survey, ARIEL, has been selected to be the next M4 space mission in the ESA Cosmic Vision programme. From launch in 2028, and during the following 4 years of operation, ARIEL will perform precise spectroscopy of the atmospheres of about 1000 known transiting exoplanets using its metre-class telescope, a three-band photometer and three spectrometers that will cover the 0.5 µm to 7.8 µm region of the electromagnetic spectrum. The payload is designed to perform primary and secondary transit spectroscopy, and to measure spectrally resolved phase curves with a stability of < 100 ppm (goal 10 ppm). Observing from an L2 orbit, ARIEL will provide the first statistically significant spectroscopic survey of hot and warm planets. These are an ideal laboratory in which to study the chemistry, the formation and the evolution processes of exoplanets, to constrain the thermodynamics, composition and structure of their atmospheres, and to investigate the properties of the clouds.

ATLAS (Astrophysics Telescope for Large Area Spectroscopy) Probe is a mission concept for a NASA probe-class space mission with primary science goal the definitive study of galaxy evolution through the capture of 300,000,000 galaxy spectra up to z=7. It is made of a 1.5-m Ritchey-Chretien telescope with a field of view of solid angle 0.4 deg². The wavelength range is at least 1 μm to 4 μm with a goal of 0.9 μm to 5 μm. Average resolution is 600 but with a possible trade-off to get 1000 at the longer wavelengths. The ATLAS Probe instrument is made of 4 identical spectrographs each using a Digital Micro-mirror Device (DMD) as a multi-object mask. It builds on the work done for the ESA SPACE and Phase-A EUCLID projects. Three-mirror fore-optics re-image each sub-field on its DMD which has 2048 x 1080 mirrors 13.6 μm wide with 2 possible tilts, one sending light to the spectrograph, the other to a light dump. The ATLAS Probe spectrographs use prisms as dispersive elements because of their higher and more uniform transmission, their larger bandwidth, and the ability to control the resolution slope with the choice of glasses. Each spectrograph has 2 cameras. While the collimator is made of 4 mirrors, each camera is made of only one mirror which reduces the total number of optics. All mirrors are aspheric but with a relatively small P-V with respect to their best fit sphere making them easily manufacturable. For imaging, a simple mirror to replace the prism is not an option because the aberrations are globally corrected by the collimator and camera together which gives large aberrations when the mirror is inserted. An achromatic grism is used instead. There are many variations of the design that permit very different packaging of the optics. ATLAS Probe will enable ground-breaking science in all areas of astrophysics. It will (1) revolutionize galaxy evolution studies by tracing the relation between galaxies and dark matter from the local group to cosmic voids and filaments, from the epoch of reionization through the peak era of galaxy assembly; (2) open a new window into the dark universe by mapping the dark matter filaments to unveil the nature of the dark Universe using 3D weak lensing with spectroscopic redshifts, and obtaining definitive measurements of dark energy and modification of gravity using cosmic large-scale structure; (3) probe the Milky Way's dust-shrouded regions, reaching the far side of our Galaxy; and (4) characterize asteroids and other objects in the outer solar systems.

CETUS (“Cosmic Evolution Through Ultraviolet Spectroscopy”) is a mission concept that was selected by NASA for study as a Probe-class mission, meaning a mission whose full life-cycle cost to NASA is between $400M and $1.0B. CETUS has a wide-field UV telescope that will work with other survey telescopes observing at gamma-rays to radio waves to help solve major problems in galaxy and stellar astrophysics. CETUS features a 1.5-m telescope and two widefield survey instruments, a near-UV multi-object slit spectrograph (MOS), a near-UV/ far-UV camera. It also has a near- UV/far-UV imaging spectrograph to survey classes of astronomical objects one at a time. In this paper, we describe how CETUS will address questions posed by the 2010 Astrophysics Decadal Survey panel (Astro-2010) including: what are the drivers of galaxy evolution at the peak rate of star formation; what are the path(s) of evolution from the blue cloud to the red sequence; and how does the circumgalactic medium influence galaxy evolution and vice versa.

The ESA Science Programme Committee (SPC) selected CHEOPS (Characterizing Exoplanets Satellite) in October 2012 as the first Small-class mission (S1) within the Agency’s Scientific Programme, with the following requirements: science driven mission selected through an open Call; an implementation cycle, from the Call to launch, drastically shorter than for Medium-class (M) and Large-class (L) missions; a strict cost-cap to ESA, with possibly higher Member States involvement than for M or L missions. The CHEOPS mission is devoted to the characterization of known exoplanets orbiting bright stars, achieved through the precise measurement of exoplanet radii using the technique of transit photometry. It was adopted for implementation in February 2014 as a partnership between the ESA Science Programme and Switzerland, with a number of other Member States delivering significant contributions to the instrument development and to operations. The CHEOPS instrument is an optical Ritchey-Chrétien telescope with 300 mm effective aperture diameter and a large external baffle to minimize straylight. The compact CHEOPS spacecraft (approx. 300 kg, 1.5 m size), based on a flight-proven platform, will orbit the Earth in a dawn-dusk Sun Synchronous Orbit at 700 km altitude. CHEOPS completed the Preliminary Design Review at the end of September 2014, and passed the Critical Design Review in May 2016. In the course of 2017, flight platform and payload have been integrated and tested, while satellite level activities are planned to start in early 2018, targeting flight readiness by the end of the year. The paper describes the latest CHEOPS development status, focusing on the acceptance test performed on instrument and platform, as well as on the satellite level environmental test campaign.

The Galaxy Evolution Probe (GEP) is a concept for a mid and far-infrared space observatory designed to survey sky for star-forming galaxies from redshifts of z = 0 to beyond z = 4. Furthering our knowledge of galaxy formation requires uniform surveys of star-forming galaxies over a large range of redshifts and environments to accurately describe star formation, supermassive black hole growth, and interactions between these processes in galaxies. The GEP design includes a 2 m diameter SiC telescope actively cooled to 4 K and two instruments: (1) An imager to detect star-forming galaxies and measure their redshifts photometrically using emission features of polycyclic aromatic hydrocarbons. It will cover wavelengths from 10 to 400 μm, with 23 spectral resolution R = 8 filter-defined bands from 10 to 95 μm and five R = 3.5 bands from 95 to 400 μm. (2) A 24 – 193 μm, R = 200 dispersive spectrometer for redshift confirmation, identification of active galactic nuclei, and interstellar astrophysics using atomic fine-structure lines. The GEP will observe from a Sun-Earth L2 orbit, with a design lifetime of four years, devoted first to galaxy surveys with the imager and second to follow-up spectroscopy. The focal planes of the imager and the spectrometer will utilize KIDs, with the spectrometer comprised of four slit-coupled diffraction gratings feeding the KIDs. Cooling for the telescope, optics, and KID amplifiers will be provided by solar-powered cryocoolers, with a multi-stage adiabatic demagnetization refrigerator providing 100 mK cooling for the KIDs.

The Habitable-Exoplanet Imaging Mission (HabEx) is a candidate flagship mission being studied by NASA and the astrophysics community in preparation of the 2020 Decadal Survey. The HabEx mission concept is a large (~4 to 6.5m) diffraction-limited optical space telescope, providing unprecedented resolution and contrast in the optical, with extensions into the near UV and near infrared domains. The primary goal of HabEx is to answer fundamental questions in exoplanet science, searching for and characterizing potentially habitable worlds, providing the first complete “family portraits” of planets around our nearest Sun-like neighbors and placing the solar system in the context of a diverse set of exoplanets. At the same time, HabEx will enable a broad range of Galactic, extragalactic, and solar system astrophysics, from resolved stellar population studies that inform the stellar formation history of nearby galaxies, to characterizing the life cycle of baryons as they flow in and out of galaxies, to detailed studies of bodies in our own solar system. We report here on our team’s efforts in defining a scientifically compelling HabEx mission that is technologically executable, affordable within NASA’s expected budgetary envelope, and timely for the next decade. In particular, we present architectures trade study results, quantify technical requirements and predict scientific yield for a small number of design reference missions, all with broad capabilities in both exoplanet science and cosmic origins science. This research was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration.

The Origins Space Telescope (OST) mission concept study is the subject of one of the four science and technology definition studies supported by NASA Headquarters to prepare for the 2020 Astronomy and Astrophysics Decadal Survey. OST will survey the most distant galaxies to discern the rise of metals and dust and to unveil the co-evolution of galaxy and blackhole formation, study the Milky Way to follow the path of water from the interstellar medium to habitable worlds in planetary systems, and measure biosignatures from exoplanets. This paper describes the science drivers and how they drove key requirements for OST Mission Concept 2, which will operate between ~5 and ~600 microns with a JWST sized telescope. Mission Concept 2 for the OST study optimizes the engineering for the key science cases into a powerful and more economical observatory compared to Mission Concept 1.

NASA commissioned the study of four large mission concepts, including the Large Ultraviolet / Optical / Infrared (LUVOIR) Surveyor, to be evaluated by the 2020 Decadal Survey in Astrophysics. In response, the Science and Technology Definition Team (STDT) identified a broad range of science objectives for LUVOIR that include the direct imaging and spectral characterization of habitable exoplanets around sun-like stars, the study of galaxy formation and evolution, the exchange of matter between galaxies, star and planet formation, and the remote sensing of Solar System objects. To meet these objectives, the LUVOIR Study Office, located at NASA’s Goddard Space Flight Center (GSFC), completed the first design iteration of a 15-m segmented-aperture observatory that would be launched by the Space Launch System (SLS) Block 2 configuration. The observatory includes four serviceable instruments: the Extreme Coronagraph for Living Planetary Systems (ECLIPS), an optical / near-infrared coronagraph capable of delivering 10⁻¹⁰ contrast at inner working angles as small as 2 λ/D; the LUVOIR UV Multi-object Spectrograph (LUMOS), which will provide low- and medium-resolution UV (100 – 400 nm) multi-object imaging spectroscopy in addition to far-UV imaging; the High Definition Imager (HDI), a high-resolution wide-field-of-view NUV-Optical-NIR imager; and Pollux, a high-resolution UV spectro-polarimeter being contributed by Centre National d’Etudes Spatiales (CNES). The study team has executed a second design iteration to further improve upon the 15-m concept, while simultaneously studying an 8-m concept. In these proceedings, we provide an update on these two architectures.

The Habitable-Exoplanet Observatory (HabEx) is a candidate flagship mission being studied by NASA and the astrophysics community in preparation of the 2020 Decadal Survey. The first HabEx mission concept that has been studied is a large (~4m) diffraction-limited optical space telescope, providing unprecedented resolution and contrast in the optical, with extensions into the near ulttraviolet and near infrared domains. We report here on our team’s efforts in defining a scientifically compelling HabEx mission that is technologically executable, affordable within NASA’s expected budgetary envelope, and timely for the next decade. We also briefly discuss our plans to explore less ambitious, descoped missions relative to the primary mission architecture discussed here.

The Habitable Exoplanet Imaging Mission (HabEx) Study is one of four studies sponsored by NASA for consideration by the 2020 Decadal Survey Committee as a potential flagship astrophysics mission. A primary science directive of HabEx would be to image and characterize potential habitable exoplanets around nearby stars. As such, the baseline design of the HabEx observatory includes two complimentary starlight suppression systems that reveal the reflected light from the exoplanet – an internal coronagraph instrument, and an external, formation-flying starshade occulter. In addition, two general astrophysics instruments are baselined: a high-resolution ultraviolet spectrograph, and an ultraviolet, visible, and near-infrared (UV/Vis/NIR), multi-purpose, wide-field imaging camera and spectrograph. In this paper, we present the baseline architecture concept for a 4m HabEx telescope, including key requirements and a description of the mission and payload designs.

The Habitable Exoplanet Imaging Mission (HabEx) concept has been designed to enable an extensive suite of science, broadly put under the rubric of General Astrophysics, in addition to its exoplanet direct imaging science. General astrophysics directly addresses multiple NASA programmatic branches, and HabEx will enable investigations ranging from cosmology, to galaxy evolution, to stellar population studies, to exoplanet transit spectroscopy, to Solar System studies. This poster briefly describes one of the two primary HabEx General Astrophysics instruments, the HabEx Workhorse Camera (HWC). HWC will be a dual-detector UV-to-near-IR imager and multi-object grism spectrometer with a microshutter array and a moderate (3' x 3') field-of-view. We detail some of the key science we expect HWC to undertake, emphasizing unique capabilities enabled by a large-aperture, highly stable space-borne platform at these wavelengths.

HabEx Architecture A is a 4m unobscured telescope mission concept optimized for direct imaging and spectroscopy of potentially habitable exoplanets, and also enables a wide range of general astrophysics science. The exoplanet detection and characterization drives the enabling core technologies. A hybrid starlight suppression approach of a starshade and coronagraph diversifies technology maturation risk. In this paper we assess these exoplanet-driven technologies, including elements of coronagraphs, starshades, mirrors, jitter mitigation, wavefront control, and detectors. By utilizing high technology readiness solutions where feasible, and identifying required technology development that can begin early, HabEx will be well positioned for assessment by the community in 2020 Astrophysics Decadal Survey.

The HabEx (Habitable Exoplanet) space telescope mission concept carries two complementary optical systems as part of its baseline design, a coronagraph and a starshade, that are designed to detect and characterize planetary systems around nearby stars. The starshade is an external occulter which would be 72 m in diameter and fly some 124,000 km ahead of the telescope. A starshade instrument on board the telescope enables formation flying to maintain the starshade within 1 m of the line of sight to the star. The starshade instrument has various modes, including imaging from the near UV through to the near infrared and integral field spectroscopy in the visible band. The coronagraph would provide imaging and integral field spectroscopy in the visible band and would reach out to 1800 nm for low resolution spectroscopy in the near infrared. To provide the necessary stability for the coronagraph, the telescope would be equipped with a laser metrology system allowing measurement and control of the relative positions of the principal mirrors. In addition, a fine guidance sensor is needed for precision attitude control. The requirements for telescope stability for coronagraphy are discussed. The design and requirements on the starshade will also be discussed.

This paper provides an overview of a feasible design architecture that satisfies the strict pointing requirements for the 2020 Astrophysics Decadal Survey Habitable Exoplanet Observatory (HabEx) Architecture A mission concept. Microthruster technology has matured significantly in recent years, with high specific impulse and low-level disturbance making microthrusters the prime candidate for high-precision pointing in upcoming space telescope missions. HabEx’s Architecture A concept utilizes microthrusters as the main actuators for the attitude control system pointing mode and a fine steering piezo-electric-operated mirror is utilized in the inner finepointing loop of the attitude control system. Sensing is undertaken using a high-resolution, low-noise focal-plane camera that can support high readout speeds (> 100 Hz), in addition to a state-of-the-art low-order wavefront sensor, which is currently under technology development for NASA’s Wide Field Infrared Survey Telescope (WFIRST).

The primary science goal of the Habitable Exoplanet Imaging Mission (HabEx), one of four candidate flagship missions under investigation, is to image and spectrally characterize Earth-like exoplanets. It is well known that pupil obscurations degrade coronagraphic performance and complicate coronagraph design, so HabEx is planned to have an off-axis, unobscured primary mirror. We utilize the circular symmetry of the aperture to investigate 1D-radial coronagraph optimization methods that are prohibitively time-consuming or intractable in 2D, such as diffractive pupil remapping and concurrent, multi-plane optimization. We also directly constrain sensitivities to dynamic, low-order Zernike aberrations, which are separable in polar coordinates and can thus be propagated as 1D-radial integrals. The mask technologies in our designs claim heritage from the extensive modeling and testbed experiments performed by the Wide-Field Infrared Survey Telescope (WFIRST) Coronagraph Instrument (CGI) project. In this paper, we detail our optimization methods and outline future work to complete our design survey.

The Habitable Exoplanet Observatory Mission (HabEx) is one of four missions under study for the 2020 Astrophysics Decadal Survey. Its goal is to directly image and spectroscopically characterize planetary systems in the habitable zone around nearby sun-like stars. Additionally, HabEx will perform a broad range of general astrophysics science enabled by 100 to 2500 nm spectral range and 3 x 3 arc-minute FOV. Critical to achieving the HabEx science goals is a large, ultrastable UV/Optical/Near-IR (UVOIR) telescope. The baseline HabEx telescope is a 4-meter off-axis unobscured threemirror- anastigmatic, diffraction limited at 400 nm with wavefront stability on the order of a few 10s of picometers. This paper summarizes the opto-mechanical design of the HabEx baseline optical telescope assembly, including a discussion of how science requirements drive the telescope’s specifications, and presents analysis that the baseline telescope structure meets its specified tolerances.

The HabEx mission concept is intended to directly image planetary systems around nearby stars, and to perform a wide range of general astrophysics and solar system observations. Its main goal is the discovery and characterization of Earthlike exoplanets through high-contrast imaging and spectroscopy. The baseline HabEx concept would use both a coronagraph and a starshade for exoplanet science. We describe an alternative, “HabEx Lite” concept, which would use a starshade (only) for exoplanet science. The benefit is lower cost: by deleting the complex coronagraph instrument; by lowering observatory mass; by relaxing tolerances and stability requirements; by permitting use of a compact on-axis telescope design; by use of a smaller launch vehicle. The scientific penalty of this lower cost option is a smaller number of detected exoplanets of all types, including exoEarth candidates, and a smaller fraction of exoplanets with measured orbits. Our approach uses a non-deployed segmented primary mirror, whose manufacture is within current capabilities.

For internal coronagraph options on the LUVOIR or HabEx mission concepts, the stated challenge of 10 picometers RMS wavefront stability over 10 minutes will govern the performance of every structure that connects the focal plane assembly to each optical surface. This paper interrogates wavefront stability of a mounted mirror assembly for a primary mirror segment assembly, and stability of the optical surface. Analysis describes stability of each element in a primary mirror segment assembly (PMSA) to understand the impact of each component of the PMSA on surface figure error (SFE) over short time periods.

In preparation for the Astro 2020 Decadal Survey NASA has commissioned the study four flagship missions spanning to a wide range of observable wavelengths: the Origins Space Telescope (OST, formerly the Far-Infrared Surveyor), Lynx (formerly the X-ray Surveyor), the Large UV/Optical/Infrared Surveyor (LUVOIR) and the Habitable Exoplanet Imager (HabEx). One of the key scientific objectives of the latter two is the detection and characterization of the earth-like planets around nearby stars using the direct imaging technique (along with a broad range of investigations regarding the architecture of and atmospheric composition exo-planetary systems using this technique). As a consequence dedicated exoplanet instruments are being studied for these mission concepts. This paper discusses the design of the coronagraph instrument for the architectures “A” and “B” (respectively 15 and 9 m apertures) of LUVOIR. The material presented in this paper is aimed at providing an overview of the LUVOIR coronagraph instrument for both architectures. It is the result of a year and a half of discussions and with various community stakeholders (scientists and technologists) regarding the instrument’s basic parameters followed by meticulous design work by the the GSFC Instrument Design Laboratory team. In the first section we review the main science drivers and presents the overall parameters of the instrument (general architecture and backend instrument). We then delve into the details of the currently envisioned coronagraph masks along with a description of the wavefront control system. Throughout the manuscript we describe the trades we made during the design process. Because the vocation of this study is to provide a baseline design for the most ambitious earth-like finding instrument that could be possibly launched into the 2030’s, we have designed an complex system that meets the ambitious science goals out team was chartered by the LUVOIR STDT exoplanet Working Group. We minimized technological risk by emphasizing technologies that will be matured by the WFIRST coronagraph instrument.

The Coronagraph is a key instrument on the Large UV-Optical-Infrared (LUVOIR) Surveyor mission concept. The Apodized Pupil Lyot Coronagraph (APLC) is one of the baselined mask technologies to enable 1E10 contrast observations in the habitable zones of nearby stars. The LUVOIR concept uses a large, segmented primary mirror (9--15 meters in diameter) to meet its scientific objectives. For such an observatory architecture, the coronagraph performance depends on active wavefront sensing and control and metrology subsystems to compensate for errors in segment alignment (piston and tip/tilt), secondary mirror alignment, and global low-order wavefront errors. Here we present the latest results of the simulation of these effects for different working angle regions and discuss the achieved contrast for exoplanet detection and characterization under these circumstances, including simulated observations using high-fidelity spatial and spectral models of planetary systems generated with Haystacks, setting boundaries for the tolerance of such errors.

The Large UV/Optical/IR Surveyor (LUVOIR) is a concept for a highly capable, multi-wavelength space observatory with ambitious science goals. Finding and characterizing a wide range of exoplanets, including those that might be habitable, is a major goal of the study. Driven by the ambitious science goals is the challenges of the optical design. The paper will present how the optical design meets the unique challenges for coronagraphs on large segmented telescopes to achieve high contrast for a wide wavelength range from 400 nm to 1700 nm, such as the position and size of occulter masks, deformable mirror placement and separation, diffraction from a segmented mirror, tight tolerances on the optical system and each element, etc. Two types of spectrometers are designed after the coronagraph to analyze the spectrum of detected exo-planet signals: one is an Integral Field Spectrograph (IFS), and the other one is a High Resolution Spectrometer (HRS). These two spectral instruments will provide information scientists requested in searching for habitable planets. The optical designs, unique challenges, and the solutions for all coronagraph and spectral instruments will be presented. Their specifications derived from science goal will be detailed.

Future large astronomical telescopes in space will have architectures that will have complex and demanding requirements to meet the science goals. The Large UV/Optical/IR Surveyor (LUVOIR) mission concept being assessed by the NASA/Goddard Space Flight Center is expected to be 8 to 16 meters in diameter, have a segmented primary mirror, active control, and be diffraction limited at a wavelength of 500 nanometers. The optical stability is expected to be in the picometer range for minutes to hours. Architecture studies to support the NASA Science and Technology Definition teams (STDTs) are underway to evaluate systems performance. A wave front error budget has been developed to help define the technology needs and assess performance. The budget includes both spatial and temporal domain aspects for the active, adaptive and passive elements in the optical design.

LUVOIR is one of the four large missions being studied for the Astro 2020 decadal review. The LUVOIR observatory is a large, ~9-15m diameter, serviceable concept. The observatory must be highly stable, low 10’s of picometers/10s of minutes and has cold, less than 100K detectors, and warm mirrors, 270K. This paper discusses the evolution of the thermal architecture and discusses the trades evaluated to arrive at the current concept. The next steps in the development will be discussed.

The Origins Space Telescope (OST) will trace the history of our origins from the time dust and heavy elements permanently altered the cosmic landscape to present-day life. How did the universe evolve in response to its changing ingredients? How common are life-bearing planets? To accomplish its scientific objectives, OST will operate at mid- and far-infrared wavelengths and offer superlative sensitivity and new spectroscopic capabilities. The OST study team will present a scientifically compelling, executable mission concept to the 2020 Decadal Survey in Astrophysics. To understand the concept solution space, our team studied two alternative mission concepts. We report on the study approach and describe both of these concepts, give the rationale for major design decisions, and briefly describe the mission-enabling technology.

This paper examines the architectural considerations for one of the designs being considered for the Origins Space Telescope (OST) a future far infra-red (~6-600 µm) space-based observatory. OST requires the temperature of the instruments and optics to operate at temperatures less than 4 Kelvin. Achieving these very low temperatures throughout the optical train in an executable and verifiable design is the defining architectural challenge for OST. This paper will discuss the main elements of OST’s thermal design, cooling, parasitics and thermal verification. This paper will include a discussion of how to modify the JWST for application in the far infra-red.

The Mid-infrared Imager, Spectrometer, Coronagraph (MISC) is one of the instruments studied both for the Origins Space Telescope (OST) Mission Concept 1 and 2. The MISC for OST Mission Concept 1 consists of the MISC imager and spectrometer module (MISC I and S), the MISC coronagraph module (MISC COR) and the MISC transit spectrometer module (MISC TRA). The MISC I and S offers (1) a wide field (3 arcminx3 arcmin) imaging and low-resolution spectroscopic capability with filters and grisms for 6-38 μm, (2) a medium-resolution (R~1,000) Integral Field Unit (IFU) spectroscopic capability for 5- 38 μm and (3) a high-resolution (R~25,000) slit spectroscopic capability for 12-18 μm and 25-36 μm. The MISC COR module employs PIAACMC coronagraphy method and covers 6-38 μm achieving 10-7 contrast at 0.5 arcsec from the central star. The MISC TRA module employs a densified pupil spectroscopic design to achieve 3-5 ppm of spectro-photometric stability and covers 5-26 μm with R=100-300. The MISC for OST Mission Concept 2 consists of the MISC wide field imager module (MISC WFI) and the MISC transit Spectrometer module (MISC TRA). The MISC WFI offers a wide field (3 arcmin ×3 arcmin) imaging and low-resolution spectroscopic capabilities with filters and grisms for 6-28μm. The MISC TRA module in the OST Mission Concept 2 also employs the densified pupil spectroscopic design to achieve <5 ppm of spectro-photometric stability and covers 4-22 μm with R=100-300. The highest ever spectrophotometric stability achieved by MISC TRA enables to detect bio-signatures (e.g., ozone, water, and methane) in habitable worlds in both primary and secondary transits of exoplanets and makes the OST a powerful tool to bring an revolutionary progress in exoplanet sciences. Combined with the spectroscopic capability in the FIR provided by other OST instruments, the MISC widens the wavelength coverage of OST down to 5μm, which makes the OST a powerful tool to diagnose the physical and chemical condition of the ISM using dust features, molecules lines and atomic and ionic lines. The MISC also provides the OST with a focal plane guiding function for the other OST science instruments as well as its own use.

The OSS on the Origins Space Telescope is designed to decode the cosmic history of nucleosynthesis, star formation, and supermassive black hole growth with wide-area spatial-spectral 3-D surveys across the full 25 to 590 micron band. Six wideband grating modules combine to cover the full band at R=300, each couples a long slit with 60-190 beams on the sky. OSS will have a total of 120,000 background-limited detector pixels in the six 2-D arrays which provide spatial and spectral coverage. The suite of grating modules can be used for pointed observations of targets of interest, and are particularly powerful for 3-D spectral spectral surveys. To chart the transition from interstellar material, particularly water, to planetary systems, two high-spectral-resolution modes are included. The first incorporates a Fourier-transform spectrometer (FTS) in front of the gratings providing resolving power of 25,000 (δv = 12 km/s) at 179 µm to resolve water emission in protoplanetary disk spectra. The second boosts the FTS capability with an additional etalon (Fabry-Perot interferometer) to provide 2 km/s resolution in this line to enable detailed structural studies of disks in the various water and HD lines. Optical, thermal, and mechanical designs are presented, and the system approach to the detector readout enabling the large formats is described.

The Origins Space Telescope (OST) is studied as a future Mid- and Far-Infrared Observatory. It’s scale is a NASA Astrophysics flagship mission to launch in the mid 2030’s. OST will cover the wavelength range from 6 to 600 µm. To reach the sky background for wavelengths greater than about 15 microns, it is necessary to restrict the telescope emission to temperatures lower than JWST (40 K). For 200 micron wavelengths temperatures of 4 K or lower are required. To achieve this low temperature active cooling is required, along with passive shielding and passive radiation to deep space. Currently two concepts are being studied: Concept 1 with a 9 m diameter primary and a suite of 5 extremely capable instruments providing both imaging and spectroscopy over the entire wavelength range. Concept 1 will require an SLS launch vehicle, currently in development, to reach Sun-Earth L2 (SEL2). Concept 2 is a more modest sized telescope with a collecting area equivalent to a 5 m primary, fewer deployments and 3 or 4 instruments also covering the entire wavelength range for imaging and spectroscopy, although with somewhat reduced spectroscopic resolution, and somewhat slower mapping speed. Concept 2’s mass and volume will fit into currently available rocket capabilities to reach SEL2. This paper will describe OST Concept 2’s cryogenic thermal architecture and thermal model results.

The Origins Space Telescope (OST) is the mission concept for the Far-Infrared Surveyor, one of the four science and technology definition studies of NASA Headquarters for the 2020 Astronomy and Astrophysics Decadal survey. "Concept-1" is a cold (4 K) 9 m space telescope with five instruments, while "concept 2" consists of a cold 5.9 m telescope and four instruments, providing imaging and spectroscopic capabilities between 5μm and 600μm. The sensitivity provided by the observatory will be a three to four orders of magnitude improvement over currently achieved observational capabilities, allowing to address a wide range of new and so far inaccessible scientific questions, ranging from bio-signatures in the atmospheres of exo-planets to the production of the first metals in the universe right after the end of re-ionization. Here we present the Far Infrared Imager and Polarimeter (FIP) for OST. The camera will cover four bands, 50μm, 100μm, 250μm, and 500μm. In the "concept 1" version of the instrument, FIP will allow for differential polarimetry with the ability to observe two colors simultaneously, while all four bands can be observed simultaneously in total power mode. The confusion limit in the total power mode will be reached in only 8 ms at 500μm, while at 50μm the source density in the sky is so low that at OST's angular resolution of (see manuscript for symbol) 2" in this band the source confusion limit will only be reached after about two hours of integration with the "concept-2" version of FIP ("concept-1" FIP will not be confusion limited at 50m, no matter how long it integrates). Science topics that can be addressed by the camera include, but are not limited to, galactic and extragalactic magnetic field studies, deep galaxy surveys, and outer Solar System objects.

The Origins Space Telescope (OST) is a NASA study for a large satellite mission to be submitted to the 2020 Decadal Review. The proposed satellite has a fleet of instruments including the HEterodyne Receivers for OST (HERO). HERO is designed around the quest to follow the trail of water from the ISM to disks around protostars and planets. HERO will perform high-spectral resolution measurements with 2x9 pixel focal plane arrays at any frequency between 468GHz to 2,700GHz (617 to 111 μm). HERO builds on the successful Herschel/HIFI heritage, as well as recent technological innovations, allowing it to surpass any prior heterodyne instrument in terms of sensitivity and spectral coverage.

Characterizing exoearths at wavelength about 10 micron offers many benefits over visible coronagraphy. Apart from providing direct access to a number of significant bio-signatures, direct-imaging in the mid-infrared can provide 1000 times or more relaxation to contrast requirements while greatly shortening the time-scales over which the system must be stable. This in turn enables tremendous relief to optical manufacturing, control and stability tolerances bringing them inline with current technology state of the art. In this paper, we explore a reference design that co-optimizes a large, segmented, linearized aperture telescope using one-dimensional phase-induced aperture apodization to provide highcontrast imaging for spectroscopic analysis. By rotating about a parent star, the chemical signatures of its planets are characterized while affording additional means for background suppression.

Direct imaging and spectroscopy of terrestrial exoplanets requires the control of vector electromagnetic fields to approximately one part in ten to the fifth over a few milliarc second FOV to achieve the necessary 10^-10 intensity contrast levels. Observations using space telescopes are necessary to achieve these levels of diffracted and scattered light control. The highly reflecting metal mirrors and their coatings needed to image these very faint exoplanets introduce polarization into the wavefront, which, in turn affects image quality and reduces exoplanet yield unless corrected. To identify and create the technologies and the electro-optical/mechanical-spacecraft systems models that will achieve these levels, NASA is currently developing two mission concepts, each with their own hardware vision. These are: The Habex, a habitable planet explorer and the LUVOIR, a Large Ultra-Violet Optical-Infrared space telescope system. This paper reports the results of polarization ray-tracing the HabEx detailed optical prescription provided by the project to the authors in the fall of 2017. Diattenuation and retardance across both the exit pupil associated with the occulting mask and the exit pupil associated with the coronagraph image plane are given as well as the corresponding Jones pupil matrices. These are calculated assuming isotropic coatings on all mirrors. Analysis and physical measurements indicates that the specification of the primary mirror for exoplanet coronagraphs will need to include a constraint on spatially varying polarization reflectivity (anisotropic coatings). The Jones exit-pupil phase terms, phi XX and phi YY just before the occulting mask differ in shape and are displaced one from the other by about 10 milli-waves. This shows that A/O, which corrects for geometric path differences, cannot completely correct for wavefront errors introduced by polarization for this particular prescription for HabEx. We suggest that these differences may be corrected by adjusting the opto-mechanical design to change angles of incidence on mirrors and corrected by adjusting the design of the dielectric coatings on the highly-reflecting mirror surfaces. Super-posing the phase of XX onto the phase of YY and then correcting using A/O will assure maximum power transmittance through the system and best contrast. These aspects require further investigation.

The Shaped Pupil Coronagraph (SPC) is one of the two operating modes of the baseline coronagraph instrument for the proposed WFIRST mission. While in SPC mode, multiple sets of shaped pupil masks and focal plane masks would be available for various imaging tasks. The disk science mask set (SPC-DSM) is designed for exozodiacal disk science. With a 360 degree high contrast field of view, extending up to 20 λ/D, the SPC-DSM provides a powerful tool to study exozodiacal dust clouds associated with stellar debris disks to gain insight of the exoplanet formation and stellar disk dynamics. We will describe the performance verification and demonstration of the SPC-DSM coronagraph as tested in the high contrast imaging testbed (HCIT) at JPL. The goal of the testbed demonstration is an average contrast of 5e-9 over a 10% bandwidth centered at 565nm, in a field of view extending from 6.5 λ/D to 20 λ/D. We will discuss electric field conjugation, performance metrics, and model agreement as applied to the SPC-DSM.

Imaging Earth-like exoplanets with future space telescopes will require a coronagraph instrument that is capable of creating a dark zone in the starlight at the image plane that is ten orders of magnitude fainter than the off-axis image of the host star. What is more, the coronagraph must simultaneously provide a stable dark zone and high throughput over the angular separations that correspond to habitable zones around nearby Sun-like stars (~10-100 milliarcseconds). Since the pupils of most large-aperture space telescope architectures are likely to be obstructed by secondary mirrors, spider support structures, and gaps between mirror segments, the coronagraph optics must also be specially tailored to passively suppress starlight diffracted from the obstructions and discontinuities in the telescope pupil. Here, we demonstrate an apodized vortex coronagraph optimized for an off-axis segmented telescope on the new High Contrast Spectroscopy Testbed for Segmented Telescopes (HCST) at Caltech. The coronagraph consists of a microdot apodizer, a liquid crystal vortex phase mask in the focal plane, and a Lyot stop. The microdot apodizer is an AR-coated glass window with 10um gold microdots to be used in reflection around lambda=800nm. We describe the HCST optical system; the apodizer optimization, fabrication, and metrology procedures; and present end-to-end testbed results of the coronagraph coupled with a 32x32 Boston Micromachines deformable mirror for wavefront control. We aim to achieve a dark zone 10^-7 times fainter than the simulated host star over a wavelength range of 800±40nm in Spring 2018. Finally, we will outline future plans to demonstrate coronagraph concepts for centrally obscured telescopes.

To directly image and characterize exoplanets, starlight suppression systems rely on coronagraphs to optically remove starlight while preserving planet light for spectroscopy. The Phase-Induced Amplitude Apodization Complex Mask Coronagraph (PIAACMC) is an attractive coronagraph option for the next generation of large space telescopes optimized for habitable exoplanet imaging: PIAACMC offers high throughput, small inner working angle (IWA) with little loss in image quality. PIAACMC is also compatible with segmented apertures, preserving much of the throughput and resolution of a full pupil. Coronagraph compatibility with segmented apertures is essential for the success of habitable planet characterization with future large apertures, such as the Large UV / Optical/ Infrared (LUVOIR) concept currently under way to inform the 2020 decadal survey. We present a design of PIAACMC for a segmented aperture, using the segmented aperture currently considered for LUVOIR as a representative case. This design is optimized to be resilient to tip/tilt jitter and large stellar angular sizes. This also enables it to have improved tolerance to polarization-specific aberrations, which are dominated by low-order modes such as tip-tilt and astigmatism. We simulate and study the performance of this design using a simplified instrument model. These simulations include wavefront control and tip-tilt errors. We characterize the performance of our design in monochromatic as well as broadband light in terms of throughput, inner working angle, contrast, area of the dark zone, and sensitivity to low-order aberrations.

Combining active pupil correction via deformable mirrors (DMs) with coronagraphs such as the Apodized Pupil Lyot Coronagraph (APLC) provides a powerful tool for creating high contrast dark holes with obstructed pupils featuring central obstructions, spiders, and gaps. We investigate optimal combinations of DM pupil remapping via Active Compensation of Aperture Discontinuities- Optimized Stroke Minimization (ACAD-OSM) and binary mask pupil apodization to obtain dark holes with contrasts of 10¹⁰ for the APLC. We examine the space of possible configurations for an APLC apodized with a circularly symmetric pupil mask and a pair of DMs using a modified MCMC algorithm that allows us to probe previously unexamined combinations of pupil apodization, focal plane mask size, and Lyot stop size. We find designs with ~ 20% encircled energy throughput for a focal plane mask radius of 4.5λ/D and a bandwidth of 20%, as well as for a focal plane mask radius of 3.18 λ/D and a bandwidth of 10%. We also find solutions for focal plane mask radii of 2 λ/D and 20% bandwidths that can obtain encircled energy throughputs of up to ~ 4%. Our strategy of combining circularly symmetric binary masks with DMs to create dark holes with obstructed pupils can be expanded to optimize the APLC for terrestrial exoplanet yield, and we conclude by exploring the possibility of optimizing coronagraphs using a simple parametric expression for yield.

Larger mirrors are needed to satisfy the requirements of the next generation of UV-Vis space telescopes. Our NASA-NIAC funded project, titled A Precise Extremely large Reflective Telescope Using Reconfigurable Elements (APERTURE), attempts to meet this requirement. The aim of the project is to demonstrate technology that would deploy a large, continuous, high figure accuracy membrane mirror. The figure of the membrane mirror is corrected after deployment using a contiguous coating of a Magnetic Smart Material (MSM) and a magnetic field. The MSM is a magnetostrictive material which is driven by magnetic write head(s) (MWH), locally imposed on the non-reflective side of the membrane mirror. In this proceeding we report the figure accuracy of the MSM coated membrane mirror under various conditions using a Shack-Hartmann surface profiler. The figure accuracy and magnetostrictive performance of the membrane mirror is found to be significantly dependent on ambient temperature fluctuations, the tension load on the membrane, time, magnetic writing head orientation and magnetic field strength. The results and reproducibility of the surface profiling experiments under various conditions are introduced and discussed.

The continuous strive for increased sensitiv ity and higher resolution of space based telescopes can only be satisfied with larger primary mirrors. There are quite a few challenges in launching large mirrors in space such as surviving the stress created from the launch acceleration, deployment, thermoelastic deformations, the gravity release etc. Major constraint to space based application is weight which drives the development of thin, extremely lightweight mirrors. Such mirrors are prone for stress based deformations and need active optics correction chain (AOCC) in order to be operated at their full potential. An AOCC for large monolithic mirrors consists of three key active optics components: corrective element (e.g. deformable mirror or DM), wavefront sensor (WFS) and correction algorithm. In order to assess the feasibility of such a system we have developed an AOCC test stand in a collaboration with the European Space Agency (ESA) a nd Netherlands Organisation for Applied Scientific Research (TNO). With this development we aim to measure the performance and the long-term reliability of an AOCC in controlled laboratory conditions. Our design consists of two separate parts, one where the expected aberrations are generated and another where they are measured and corrected. Two deformable mirrors of 37.5 mm and 116 mm are used, the smallest mirror to generate aberrations and the largest to correct them. For wavefront sensing we are using two different wavefront sensors, an 11x11 Shack-Hartmann as well as phase diversity based at the science sensor. We are able to emulate the conditions for both, astronomy related, and Earth observations. Here, we present the design of the system, including the test stand and the correction algorithms, the performance expected from simulations, and the results from the latest lab tests.

Current high-contrast imaging systems implement wavefront control using traditional deformable mirrors developed for atmospheric turbulence correction, which require large strokes, high-speed, and continuous phase correction. However, high-contrast imaging has different requirements. Thus, developing a specialized deformable mirror for this application able to meet the demanding requirements of future exoplanet imaging flagship missions is valuable for the exoplanet scientific community. In this paper, we propose a novel wavefront control approach, called Sparse Wave-Front Control (SWFC), which enables high-contrast imaging using sparse phase changes on the active surface re-directing coherent starlight to null speckles. To validate SWFC, we simulated a telescope equipped with a Phase Induced Amplitude Apodization (PIAA) coronagraph and a 100 by 100 actuator sparse Deformable Mirror to null speckles caused by the optical system aberrations. We modeled the mirror as a flat surface where narrow gaussian influence functions represent actuators. We performed wavefront control utilizing Electric Field Conjugation achieving 6.7e-11 mean contrast between 3 to 35λ/D in monochromatic light and 7.4e-11 in 10% broadband light. In the second part of this paper, we propose an approach to manufacture Sparse Deformable Mirrors utilizing photosensitive polymers, which could be placed below the mirror coating and can be photonically actuated by back illumination through the mirror substrate.

Large visible telescopes present challenging requirements for manufactured surface figure and stability. By comparison, far infrared (IR) telescopes relax many of these requirements by ~100x. These relaxed requirements may translate into reduced cost, schedule, mass, and system complexity. This paper explores how different mirror substrate materials might take advantage of these requirements while operating in a cryogenic environment. Primary mirror materials are evaluated for an Origins Space Telescope (OST) concept, using a 9.1 m segmented aperture in a 30 μm diffraction limited system.

Segmented telescopes are a possible approach to enable large-aperture space telescopes for the direct imaging and spectroscopy of habitable worlds. However, the increased complexity of their aperture geometry, due to the central obstruction, support structures and segment gaps, makes high-contrast imaging very challenging. The High-contrast imager for Complex Aperture Telescopes (HiCAT) testbed was designed to study and develop solutions for such telescope pupils using wavefront control and coronagraphic starlight suppression. The testbed design has the flexibility to enable studies with increasing complexity for telescope aperture geometries starting with off-axis telescopes, then on-axis telescopes with central obstruction and support structures - e.g. the Wide Field Infrared Survey Telescope (WFIRST) - up to on-axis segmented telescopes, including various concepts for a Large UV, Optical, IR telescope (LUVOIR). In the past year, HiCAT has made significant hardware and software updates in order to accelerate the development of the project. In addition to completely overhauling the software that runs the testbed, we have completed several hardware upgrades, including the second and third deformable mirror, and the first custom Apodized Pupil Lyot Coronagraph (APLC) optimized for the HiCAT aperture, which is similar to one of the possible geometries considered for LUVOIR. The testbed also includes several external metrology features for rapid replacement of parts, and in particular the ability to test multiple apodizers readily, an active tip-tilt control system to compensate for local vibration and air turbulence in the enclosure. On the software and operations side, the software infrastructure enables 24/7 automated experiments that include routine calibration tasks and high-contrast experiments. In this communication we present an overview and status update of the project, both on the hardware and software side, and describe the results obtained with APLC wavefront control.

Terrestrial exoplanets shine in light reflected from a parent star. Optical spectra are required to provide evidence of a life-supporting environment. Exoplanets are very faint and their optical spectra are contaminated by the spectrum of the parent star. High angular resolution provided by large apertures is needed to distinguish between the spectrum of the exoplanet and its star. Today, large aperture telescopes use segmented primary mirrors that employ close-packed hexagonal segments. The telescope primary mirror is periodically discontinuous with straight lines. These discontinuities scatter unwanted radiation from the much brighter parent star across the field of view to obscure the light from the very faint terrestrial exoplanet. These discontinuities, which mimic a diffraction grating, result in a non-uniform distribution of background light across the image plane. This non-uniformity masks or hides exoplanets from view, to reduce the number of exoplanets that can be observed with a large aperture telescope or to reduce the quality of spectra and thus lead to misinterpretation of data. Here we introduce the concept of the pinwheel pupil whose unique diffraction pattern significantly reduces the non-uniform distribution of background radiation. Diffraction patterns from pinwheel pupils are compared to the monolithic filled aperture, the classical Cassegrain, the 60-degree symmetry of the hexagonal segments (JWST, E-ELT, etc.). Diffraction “spikes” are reduced by at least 10⁵. We discuss the “pinwheel pupil” advantages to spectroscopy, image processing, and observatory operations. We show that, segment fabrication of curved-sided mirrors is not more difficult than fabrication of hexagonal mirror segments. . This is the report of quantitative study of Fraunhofer (far field) diffraction patterns produced by three different topologies or architectures of mirror segmentation, when illuminated by a plane wave of monochromatic white-light. A plot, in angular units of the intensity as a function of azimuth, Phi_f , within annular rings at different FOVs, centered on the system axis of the diffraction pattern will be presented. The advantages of the segmented pinwheel pupil is discussed.

Diffraction effects of large segmented mirror gaps and secondary mirror support struts produce diffraction peaks or flares that are a detriment to exoplanet detection. In this paper we present detailed parametric diffraction analyses of an innovative “Pinwheel Pupil” segmented mirror concept utilizing curved segment gaps and secondary support struts that can potentially eliminate these diffraction flares that can obscure a faint exoplanet image. The resulting numerical diffraction performance predictions are quantitatively compared to that of both ideal monolithic circular pupils and classical annular pupils with straight secondary mirror struts. We utilize performance – based merit functions consisting of both radial and azimuthal profiles of the resulting telescope point spread function.

Currently, linear state space modeling is used for focal plane wavefront estimation and control of high-contrast imaging system. Although this framework has made great strides in the past decades, it fails to track the nonlinearities from the deformable mirrors and the light propagation, which to some extent influences the accuracy of the electric field estimation and the speed and robustness of the controller. In this paper, we propose the application of neural networks to identify and optimally control a high-contrast imaging system. Based on the E-M algorithm and reinforcement learning techniques, we develop a new nonlinear system identificaton method and a corresponding nonlinear neural network controller. Simulation and experimental results from Princetons High Contrast Imaging Lab (HCIL) are reported to demonstrate the utility of this algorithm.

Satellites operating on LEO and GEO trajectories are subject to the effect of ionizing space radiations, mostly electrons, that are concentrated in the Van Allen belts. These ionizing radiations are responsible for accelerated ageing (especially compaction, i.e. local material density variation), which is thought to be detrimental for the optical figure of the embedded optical devices. The studies made on this topic during the last four decades, are proposing very different phenomenological power laws description of this effect. However, the simulated deformations derived from these laws are in partial disagreement with the observations made at the laboratory, moreover they do not account for the absence of problems reported during the space missions embedding ZERODUR material. In order to elucidate these mismatches, we defined a new experimental approach suited for the description of the compaction phenomenon for doses corresponding to typical astrospace missions. An overview of the preparatory simulation work for the design of the irradiation environment, for the design of the build-up shielding material as well as of the design of the target samples will be presented. This study will also give a short description of the experimental irradiations sequence as well as the high precision metrological approaches used in order to determine the changes induced in the ZERODUR.

This paper investigates the potential role of small satellites, specifically those often referred to as CubeSats, in the future of infrared astronomy. Whilst CubeSats are seen as excellent (and inexpensive) ways to demonstrate and improve the readiness of critical (space) technologies of the future they also potentially have a role in solving key astrophysical problems. The pros and cons of such small platforms are considered and evaluated with emphasis on the technological limitations and how these might be improved. Three case studies are presented for applications in the IR region. One of the main challenges of operating in the IR is that the detector invariably needs to be cooled. This is a significant undertaking requiring additional platform volume and power and is one of the major areas of discussion in this paper. Whilst the small aperture on a CubeSat inevitably has limitations both in terms of sensitivity and angular resolution when compared to large ground-based and space-borne telescopes, the prospect of having distributed arrays of tens (perhaps hundreds) of IR-optimised CubeSats in the future offers enormous potential. Finally, we summarise the key technology developments needed to realise the case study missions in the form of a roadmap.

SPHEREx, a mission in NASA’s Medium Explorer (MIDEX) program recently selected for Phase-A implementation, is an all-sky survey satellite that will produce a near-infrared spectrum for every 6 arcsecond pixel on the sky. SPHEREx has a simple, high-heritage design with large optical throughput to maximize spectral mapping speed. While the legacy data products will provide a rich archive of spectra for the entire astronomical community to mine, the instrument is optimized for three specific scientific goals: to probe inflation through the imprint primordial non-Gaussianity left on today’s large-scale cosmological structure; to survey the Galactic plane for water and other biogenic ices through absorption line studies; and to constrain the history of galaxy formation through power spectra of background fluctuations as measured in deep regions near the ecliptic poles. The aluminum telescope consists of a heavily baffled, wide-field off-axis reflective triplet design. The focal plane is imaged simultaneously by two mosaics of H2RG detector arrays separated by a dichroic beamsplitter. SPHEREx assembles spectra through the use of mass and volume efficient linear variable filters (LVFs) included in the focal plane assemblies, eliminating the need for any dispersive or moving elements. Instead, spectra are constructed through a series of small steps in the spacecraft attitude across the sky, modulating the location of an object within the FOV and varying the observation wavelength in each exposure. The spectra will cover the wavelength range between 0.75 and 5.0 µm at spectral resolutions ranging between R=35 and R=130. The entire telescope is cooled passively by a series of three V-groove radiators below 80K. An additional stage of radiative cooling is included to reduce the long wavelength focal plane temperature below 60K, controlling the dark current. As a whole, SPHEREx requires no new technologies and carries large technical and resource margins on every aspect of the design.

The presence of large amounts of dust in the habitable zones of nearby stars is a significant obstacle for future exo-Earth imaging missions. We executed the HOSTS (Hunt for Observable Signatures of Terrestrial Systems) survey to determine the typical amount of such exozodiacal dust around a sample of nearby main sequence stars. The majority of the data have been analyzed and we present here an update of our ongoing work. Nulling interferometry in N band was used to suppress the bright stellar light and to detect faint, extended circumstellar dust emission. We present an overview of the latest results from our ongoing work. We find seven new N band excesses in addition to the high confidence confirmation of three that were previously known. We find the first detections around Sun-like stars and around stars without previously known circumstellar dust. Our overall detection rate is 23%. The inferred occurrence rate is comparable for early type and Sun-like stars, but decreases from 71^{+11 -20}% for stars with previously detected mid- to far-infrared excess to 11^{+9 -4}% for stars without such excess, confirming earlier results at high confidence. For completed observations on individual stars, our sensitivity is five to ten times better than previous results. Assuming a lognormal luminosity function of the dust, we find upper limits on the median dust level around all stars without previously known mid to far infrared excess of 11.5 zodis at 95% confidence level. The corresponding upper limit for Sun-like stars is 16 zodis. An LBTI vetted target list of Sun-like stars for exo-Earth imaging would have a corresponding limit of 7.5 zodis. We provide important new insights into the occurrence rate and typical levels of habitable zone dust around main sequence stars. Exploiting the full range of capabilities of the LBTI provides a critical opportunity for the detailed characterization of a sample of exozodiacal dust disks to understand the origin, distribution, and properties of the dust.

The FIRST-S project is an astronomical project in the context of exoplanet detection. The scientific objective of this mission would be to study the visible emission of exozodiacal light in the habitable zone around the closest stars. It requires high dynamic range (103) at moderate resolution (arcsec). The proposed instrument is 60 cm baseline stellar interferometer with nulling capabilities based on single-mode fibers and LiNbO3 (Lithium niobate) photonic ship on a 6U CubeSat. This nulling technique is currently developed in the context of FIRST project (Fibered Imager foR a Single Telescope), and is suitable for a nanosatellite application. The first part of this challenge – controlling the injection of the star light in a single-mode fiber with a accuracy of 1 arcsecond – is addressed by the PicSat mission. PicSat is using a 2 stages pointing system: the Attitude Determination and Control System (ADCS) of the platform, and the control of a 2 axis piezo stage. The design is based on two 9cm aperture telescope, inspired by the PicSat payload. The light collected by these two telescopes is guided with the single mode fibers to the integrated active optics. The active part of this ship controls the optical phase difference to a nanometer accuracy over few microns and allow to scan the null fringe. The interferometer itself is used as an OPD sensor and interacts with the ADCS of the platform to maintain this OPD lower to few microns. In this presentation I will present the performances of PicSat on which be can base this design. The satellite design will then be described including the telescopes and injection into fibers and the recombination system. Finally the first results on a lab demonstrator with these parts will be shown.

The Double Asteroid Redirection Test (DART) is a spacecraft that will impact the smaller body of the binary asteroid Didymos. As a technology demonstration, this will be the first time a kinetic impactor is used to perturb the motion of a near earth object. This technique could someday be used to deflect a dangerous asteroid on a future collision course with Earth. As the only instrument aboard DART, the Didymos Reconnaissance and Asteroid Camera for OpNav (DRACO) serves two purposes. First, DRACO provides images to the Small-body Maneuvering Autonomous Real-Time Navigation (SMARTNav) algorithm, allowing the spacecraft to precisely locate and impact the target. In its final moments, DRACO will also characterize the impact site by providing high resolution, scientific imagery of the surface. Derived from the Long Range Reconnaissance Imager (LORRI) on New Horizons, the telescope is a 208 mm aperture, f/12.6, catadioptric Ritchey-Chrétien, with a 0.29 degree field of view. A lightweight opto-mechanical structure, with low CTE mirror substrates and a composite baffle tube, maintains telescope focus in the low temperature environment of deep space. At the focal plane is a 2560 by 2160 pixel, panchromatic, front-side illuminated complementary metal oxide semiconductor (CMOS) image sensor, with digital output, global shutter, and low read noise. A highly integrated focal plane electronics (FPE) module controls the sensor and relays data to the spacecraft.

LiteBIRD is a candidate for JAXA’s strategic large mission to observe the cosmic microwave background (CMB) polarization over the full sky at large angular scales. It is planned to be launched in the 2020s with an H3 launch vehicle for three years of observations at a Sun-Earth Lagrangian point (L2). The concept design has been studied by researchers from Japan, U.S., Canada and Europe during the ISAS Phase-A1. Large scale measurements of the CMB B-mode polarization are known as the best probe to detect primordial gravitational waves. The goal of LiteBIRD is to measure the tensor-to-scalar ratio (r) with precision of r < 0:001. A 3-year full sky survey will be carried out with a low frequency (34 - 161 GHz) telescope (LFT) and a high frequency (89 - 448 GHz) telescope (HFT), which achieve a sensitivity of 2.5 μK-arcmin with an angular resolution 30 arcminutes around 100 GHz. The concept design of LiteBIRD system, payload module (PLM), cryo-structure, LFT and verification plan is described in this paper.

This work outlines the design and development of a prototype CubeSat space telescope to directly image exoplanets and/or exozodiacal dust. This prototype represents the optical payload of the miniaturized distributed occulter/telescope (mDOT), a starshade technology demonstration mission combining a 2 meter scale microsatellite occulter and a 6U CubeSat telescope. Science requirements for the mDOT experiment are presented and translated into engineering requirements for the attitude determination and control subsystem (ADCS). The ADCS will utilize a triad of reaction wheels for coarse pointing and a tip tilt mirror for fine image stabilization down to the sub-arcsecond level. A two-stage attitude control architecture is presented to achieve precise pointing necessary for stable acquisition of diffraction limited imagery. A multiplicative extended Kalman filter is utilized to estimate the inertial attitude of the vehicle and provide input into the aforementioned controller. A hardware-in-the-loop optical stimulator is used to stimulate the payload with scenes highly representative of the space environment from a radiometric and geometric stand point. Scenes rendered to the optical stimulator are synthesized in closed-loop based off a high-fidelity numerical simulation of the underlying disturbances, orbital and attitude dynamics. Performance of the two-stage attitude control loop is quantified and demonstrates the ability to achieve sub-arcsecond pointing using a telescope payload prototype.

The BRIght Target Explorer (BRITE) is a space mission consisting of five nano-satellites aimed at the observations of microvariability of the brightest stars. Since the end of 2013, this ongoing mission has provided photometric data for nearly 500 bright stars in the sky. Taking the advantage of currently employed chopping mode of observing, a new PSF-fitting based photometric pipeline was developed for the BRITE data. The motivation for a new procedure was the expected increase of photometric precision for the dimmest objects. The proposed new method uses the principal component analysis (PCA) decomposition of stellar profile into a set of eigen-PSFs, which allows for adaptive fitting to PSFs modulated either by the blurring or by the variations of the intra-pixel sensitivity. The first results of the new pipeline confirm its good performance: for faint stars the PSF photometry results in a smaller scatter than the current photometry, while for the brightest stars the results from both pipelines are comparable. The superiority of a novel technique is evident for the most degraded sensors which makes the proposed pipeline a promising solution for the next years of the mission.

PicSat was a three unit CubeSat (measuring 30 cm Χ 10 cm Χ 10 cm) which was developed to monitor the β Pictoris system. The main science objective was the detection of a possible transit of the giant planet β Pictoris b's Hill sphere. Secondary objectives included studying the circumstellar disk, and detecting exocomets in the visible band. The mission also had a technical objective: demonstrate our ability to inject starlight in a single mode fiber, on a small satellite platform. To answer all those objectives, a dedicated opto-mechanical payload was built, and integrated in a commercial 3U platform, along with a commercial ADCS (Attitude Determination and Control System). The satellite successfully reached Low Earth Orbit on the PSLV-C40 rocket, on January, 12, 2018. Unfortunately, on March, 20, 2018, after 10 weeks of operations, the satellite fell silent, and the mission came to an early end. Furthermore, due to a failure of the ADCS, the satellite never actually pointed toward its target star during the 10 weeks of operations. In this paper, we report on the PicSat mission development process, and on the reasons why it did not deliver any useful astronomical data

The NISS (Near-infrared Imaging Spectrometer for Star formation history) have been developed by KASI as one of the scientific payloads onboard the first small satellite of NEXTSat program (NEXTSat-1) in Korea. The both imaging and low spectral resolution spectroscopy in the wide near-infrared range from 0.95 to 2.5µm and wide field of view of 2° x 2° is a unique capability of the NISS for studying the star formation in local and distant Universe. In the design of the NISS, special care was taken by implementing the off-axis system to increase the total throughput with limited resources from the small satellite. We confirmed that the mechanical structure of the NISS could be maintained in space through passive cooling of the telescope. To operate the infrared detector and spectral filters at 80K stage, the compact dewar module was assembled after the relay-lens module. The integrations of relay-lens part, primary-secondary mirror assembly and dewar module were independently performed, which alleviated the complex alignment process. The telescope and infrared sensor were validated for the operation at cryogenic temperatures of around 200K and 80K, respectively. The system performance of the NISS, such as focus, cooling efficiency, wavelength calibration and system noise, was evaluated by utilizing our constructed test facility. After the integration into the NEXTSat-1, the flight model of the NISS was tested under the space environments. The NISS is scheduled to be launched in late 2018 and it will demonstrate core technologies related to the future infrared space telescope in Korea.

This paper looks at the key programmatic and technical drivers of the James Webb Space Telescope and assesses ways to building more cost-effective telescopes in the future. The paper evaluates the top level programmatics for JWST along with the key technical drivers from design through integration and testing. Actual data and metrics from JWST are studied to identify what ultimately drove cost on JWST. Finally, the paper assesses areas where applying lessons learned can reduce costs on future observatories and will provide better insights into critical areas to optimize for cost.

Reuse of a proven design can save a mission significant time, money and risk. At least two of the decadal missions, HabEx and Origins Space Telescope, are considering the reuse of some or most of the James Webb Space Telescope flight hardware design for one of their studied architectures. Another, LUVOIR, will benefit highly from learning the necessary lessons on I&T and architecture reuse. This paper compares the performance of the Webb Telescope against the requirements for the HabEx and OST missions to identify the subsystem designs that can be reused without revisions. We will also highlight the areas where new work must be accomplished. We conclude with a net assessment that that shows Webb reuse is a viable program option and a good deal for science.

The scientific measurement requirements of future major space astronomy missions are pushing the design limits that can be autonomously deployed JWST-style from even the largest plausible launch vehicles in the 2030s and beyond. In addition, to maximize the scientific return and make missions more cost-effective, they should be capable of being serviced and upgraded. This requirement was even codified by the US Congress in 2010 to ensure the best use of taxpayer investments in science. We need to advance technologies to support this new generation of space telescopes and utilize planned NASA assets to lower costs, reduce risks, and extend mission life of flagship-class science programs for astrophysics and other NASA science. These missions will be capable of searching very large numbers of extrasolar planets for evidence of life and will enable studies, in detail, of the structure of the first star-forming complexes in the earliest galaxies and the central engines in distant galaxies, and will be powerful tools for general astrophysics and solar system science. We will present and discuss current concepts for using astronauts and robots to service, upgrade, and eventually assemble space observatories and starshades designed to achieve major breakthroughs in our understanding of the cosmos. Notional telescopic missions and instruments (filled apertures, interferometers, evolvable systems, and starshades, among others) will be used to illustrate key characteristics of this approach and demonstrate the broad application such a deep-space facility would provide science missions. The goal of this effort is to understand how to use planned NASA human spaceflight assets and infrastructure, with minimal modification, to assemble, test, and service high-value science facilities. These deep space assets are currently being defined and now is the time to jointly develop requirements and capabilities that meet both science and human exploration objectives. The technical and engineering merits and challenges of in-space servicing and assembly will be discussed, including issues of launching telescopes and instruments in parts, assembly in space, and repair and replacement of instruments and systems. Possible future space infrastructure that may make on-orbit assembly and servicing feasible will also be discussed. Precursors and demonstration activities will be presented, as well as early candidate missions for in-space upgrade and servicing.

Significant developments are being made for the in-space assembly (iSA) of lightweight structures and spacecraft systems that are needed for NASA’s future science observatory and platform missions. Technology advances in autonomy, robotic manipulators, and modular architectures now make iSA and servicing possible at an acceptable risk and cost. Future in-space system capabilities will be needed for large optical observatory and science platform missions in order to assess key structural design considerations. This paper discusses possible NASA applications of iSA, capability and technology needs for telescope assembly, and emerging technologies for space systems in the future.

Pursuing ground breaking science in a highly cost and funding constrained environment presents new challenges to the development of future large space astrophysics missions. Within the conventional cost models for large observatories, executing a flagship “mission after next” appears to be unstainable. To achieve our nation’s space astrophysics ambitions requires new paradigms in system design, development and manufacture. Implementation of this new paradigm requires that the space astrophysics community adopt new answers to a new set of questions. This paper will discuss the origins of these new questions and the steps to their answers.

Euclid-VIS is the large format visible imager for the ESA Euclid space mission in their Cosmic Vision program, scheduled for launch in 2021. Together with the near infrared imaging within the NISP instrument, it forms the basis of the weak lensing measurements of Euclid. VIS will image in a single r+i+z band from 550-900 nm over a field of view of ~0.5 deg² . By combining 4 exposures with a total of 2260 sec, VIS will reach to deeper than mAB=24.5 (10s) for sources with extent ~0.3 arcsec. The image sampling is 0.1 arcsec. VIS will provide deep imaging with a tightly controlled and stable point spread function (PSF) over a wide survey area of 15000 deg² to measure the cosmic shear from nearly 1.5 billion galaxies to high levels of accuracy, from which the cosmological parameters will be measured. In addition, VIS will also provide a legacy dataset with an unprecedented combination of spatial resolution, depth and area covering most of the extra-Galactic sky. Here we will present the results of the study carried out by the Euclid Consortium during the period up to the beginning of the Flight Model programme

In the frame work of the ESA Euclid mission to be launched in 2020, the Euclid Consortium is developing an extremely large and stable focal plane for the VIS instrument. After an extensive phase of definition and study over 4 years made at CEA on the thermo-mechanical architecture of that Focal Plane, the first model (Structural and Thermal Model) has been assembled qualified and delivered to MSSL in June 2017. The VIS Focal Plane Assembly integrates 36 CCDs (operated at 150K) connected to their front end electronics (operated at 280K). This Focal Plane will be the largest focal plane (~0.6 billion pixels) ever built for space application after the GAIA one. The CCDs are CCD273 type specially designed and provided by the Teledyne e2v company under ESA contract, front end electronics is studied and provided by MSSL. The Structural and Thermal Model is fully representative of the Flight Model regarding the thermo-mechanical architecture. As the instrument development philosophy follows a Proto Flight approach this choice has been made very early in the development program in order to reduce the risk on the PFM program. So the AIT/AIV plan has been built in order to fully validate since the STM program the overall integration, verification and qualification sequences, taking into account the very stringent cleanliness requirement. The STM FPA integrates 36 CCDs representative of the flight model except for the detection function. Electrical configuration of the front end electronics provides electrical interface in order to power the CCDs and check integrity of all the electrical links to CCDs. In this paper we first recall the architecture of the VIS-FPA and especially the solutions proposed to cope with the scientific needs of an extremely stable focal plane, both mechanically and thermally leading to a SiC structure. The modular architecture concept, considered as a key driver for such big and complex focal plane is detailed. Parallel to that, the integration workflow including verification steps is fully depicted including specific aspects linked to the use of SiC. Validation and qualification test program is described. A summary of geometrical measurements, thermal balance tests and vibrations tests including the main Ground Support Equipment description are reported. Keyword list: Euclid, CCD, SiC, focal plane, architecture, integration

This paper is an update of the development status of the NISP instrument already presented during the last SPIE conference(SPIE 9904-22)

ESA EUCLID mission will be launched in 2020 to understand the nature of the dark energy responsible of the accelerated expansion of the Universe and to map the geometry of the dark matter. The map will investigate the distanceredshift relationship and the evolution of cosmic structures thanks to two instruments: the NISP and the VIS. The NISP (Near Infrared Spectro-Photometer) is operating in the near-IR spectral range (0.9-2μm) with two observing modes: the photometric mode for the acquisition of images with broad band filters, and the spectroscopic mode for the acquisition of slitless dispersed images on the detectors. The spectroscopic mode uses four low resolution grisms to cover two spectral ranges: three "red" grisms for 1250-1850nm range, with three different orientations, and one "blue" grism for 920- 1300nm range. The NISP grisms are complex optical components combining four main optical functions: a grism function (dispersion without beam deviation of the first diffracted order) done by the grating on the prism hypotenuse, a spectral filter done by a multilayer filter deposited on the first face of the prism to select the spectral bandpass, a focus function done by the curved filter face of the prism (curvature radius of 10m) and a spectral wavefront correction done by the grating which grooves paths are nor parallel, neither straight. The development of these components have been started since 10 years at the Laboratoire d’Astrophysique de Marseille (LAM) and was linked to the project phases: prototypes have been developed to demonstrate the feasibility, then engineering and qualification models to validate the optical and mechanical performance of the component, finally the flight models have been manufactured and tested and will be installed on NISP instrument. In this paper, we present the optical performance of the four EUCLID NISP grisms flight models characterized at LAM: wavefront error, spectral transmission and grating groove profiles. The test devices and the methods developed for the characterization of these specific optical components are described. The analysis of the test results have shown that the grisms flight models for NISP are within specifications with an efficiency better than 70% on the spectral bandpass and a wavefront error on surfaces better than 30nm RMS. The components have withstood vibration qualification level up to 11.6g RMS in random test and vacuum cryogenics test down to 130K with measurement of optical quality in transmission. The EUCLID grisms flight models have been delivered to NISP project in November 2017 after the test campaign done at LAM that has demonstrated the compliance to the specifications.

NASA’s Wide Field Infrared Survey Telescope (WFIRST) is being designed to deliver unprecedented capability in dark energy and exoplanet science, and to host a technology demonstration coronagraph for exoplanet imaging and spectroscopy. The observatory design has matured since 2013 [“WFIRST 2.4m Mission Study”, D. Content, SPIE Proc Vol 8860, 2013] and we present a comprehensive description of the WFIRST observatory configuration as refined during formulation phase (AKA the phase-A study). The WFIRST observatory is based on an existing, repurposed 2.4m space telescope coupled with a 288 megapixel near-infrared (0.6 to 2 microns) HgCdTe focal plane array with multiple imaging and spectrographic modes. Together they deliver a 0.28 square degree field of view, which is approximately 100 times larger than the Hubble Space Telescope, and a sensitivity that enables rapid science surveys. In addition, the technology demonstration coronagraph will prove the feasibility of new techniques for exoplanet discovery, imaging, and spectral analysis. A composite truss structure meters both instruments to the telescope assembly, and the instruments and the spacecraft are on-orbit serviceable. We present the current design and summarize key Phase-A trade studies and configuration changes that improved interfaces, improved testability, and reduced technical risk. We provide an overview of our Integrated Modeling results, performed at an unprecedented level for a phase-A study, to illustrate performance margins with respect to static wavefront error, jitter, and thermal drift. Finally, we summarize the results of technology development and peer reviews, demonstrating our progress towards a low-risk flight development and a launch in the middle of the next decade.

The WFIRST Mission is the next large astrophysical observatory for NASA after the James Webb Space Telescope and is the top priority mission from the 2010 National Academy of Sciences’ decadal survey. The WFIRST OTA includes the inherited primary and secondary mirrors with precision metering structures that are to be integrated to new mirror assemblies to provide optical feeds to the two WFIRST instruments. We present here: (1) the results for the review of the inherited hardware for WFIRST through a thorough technical pedigree process, (2) the status of the effort to establish the capability of the telescope to perform at a cooler operational temperature of 265K, and (3) the status of the work in requirement development for OTA to incorporate the inherited hardware, and (4) the path forward.

The Wide-Field Infrared Survey Telescope (WFIRST) is planned to have a coronagraphic instrument (CGI) to enable high-contrast direct imaging of exoplanets around nearby stars. The majority of nearby FGK stars are located in multi-star systems, including the Alpha Centauri stars which may represent the best quality targets for the CGI on account of their proximity and brightness potentially allowing the direct imaging of rocky planets. However, a binary system exhibits additional leakage from the off-axis companion star that may be brighter than the target exoplanet. Multi-Star Wavefront Control (MSWC) is a wavefront-control technique that allows suppression of starlight of both stars in a binary system thus enabling direct imaging of circumstellar planets in binary star systems such as Alpha Centauri. We explore the capabilities of the WFIRST CGI instrument to directly image multi-star systems using MSWC. We consider several simulated scenarios using the WFIRST CGI's Shaped Pupil Coronagraph (SPC) Wide-Field Imaging Mode. First, we consider close binaries such as Mu Cassiopeia that require no modifications to the WFIRST CGI instrument and can be implemented as a purely algorithmic solution. Second, we consider wide binaries such as Alpha Centauri that require a diffraction grating to enable suppression of the off-axis starlight leakage at Super-Nyquist separations. We demonstrate via simulation dark holes in 10% broadband compatible with the WFIRST CGI.

The Wide-Field Infrared Survey Telescope (WFIRST) mission is the next large astrophysics observatory for NASA after the James Webb Space Telescope and is the top priority mission from the 2010 National Academy of Sciences’ decadal survey. The WFIRST Optical Telescope Assembly (OTA) includes inherited composite support structures that were originally designed and tested for room temperature operation; however, the WFIRST mission will require operation at colder temperatures to achieve sufficient sensitivity for the infrared wavelengths. We will present the results and conclusions of testing completed at the coupon and engineering model level to verify that the inherited composite structures will maintain mechanical integrity and performance over the required temperature range. The testing included: (1) characterization testing of constituent material coupons, (2) thermal cycling and static load testing of a representative aft metering structure (AMS) and forward metering structure (FMS), and (3) thermal cycling and dynamic testing of a representative secondary mirror assembly (SMA).

The Wide Field Infrared Survey Telescope (WFIRST), which is entering Phase B for a launch in 2026, is NASA’s next large space observatory after the James Webb Space Telescope. In addition to the primary science carried out by The Wide Field Instrument (WFI), which is designed to carry out surveys of galaxies in the near infrared, explore the properties of dark energy and dark matter, and carry out a microlensing survey to complete the census of exoplanets, there will be a technology demonstration of a Coronagraph Instrument (CGI) for very high-contrast imaging and spectroscopy of nearby exoplanets. The CGI will incorporate two coronagraph types and demonstrate low- and high-order wavefront correction for the first time on a space telescope. Operating in the visible, it will consist of a direct imaging camera and a lenslet based integral field spectrograph, both using electron-multiplying CCDs in the focal plane, as well as polarizers allowing direct imaging in separate polarization states. Written by the lead science and engineering team, supported by two science investigation teams (SITs – https://wfirst.gsfc.nasa.gov/science/fswg/scienceteam.html), this paper presents an overview of the technology requirements on the instrument, the instrument design, and the operational plans to demonstrate exoplanet imaging and spectroscopic capability. Also described is how CGI will advance algorithms for extracting planet images from the background and retrieving spectra from a space IFS. Once the core performance is successfully demonstrated, CGI will also be used in the latter part of the mission for a dedicated science and Guest Observer (GO) program. This paper thus also describes the potentially revolutionary science that will be enabled through direct imaging and spectroscopy of known radial velocity planets and debris disks as seen in reflected light.

The Wide Field Infrared Survey Telescope (WFIRST) Coronagraph Instrument (CGI) will be the first high-performance stellar coronagraph using active wavefront control for deep starlight suppression in space, providing unprecedented levels of contrast and spatial resolution for astronomical observations in the optical. One science case enabled by the CGI will be taking visible images and (R~50) spectra of faint interplanetary dust structures present in the habitable zone of nearby sunlike stars (~10 pc) and within the snow-line of more distant ones (~20 pc), down to dust brightness levels commensurate with that of the solar system zodiacal cloud. Reaching contrast levels below 10^-7 at sub-arcsecond angular scales for the first time, CGI will cross an important threshold in debris disks physics, accessing disks with low enough optical depths that their structure is dominated by transport mechanisms rather than collisions. Hence, CGI will help us understand how exozodiacal dust grains are produced and transported in low-density disks around mature stars. Additionally, CGI will be able to measure the brightness level and constrain the degree of asymmetry of exozodiacal clouds around individual nearby sunlike stars in the optical, at the ~3x solar zodiacal emission level. This information will be extremely valuable for optimizing the observational strategy of possible future exo-Earth direct imaging missions, especially those planning to operate at optical wavelengths as well, such as the Habitable Exoplanet Observatory (HabEx) and the Large Ultraviolet/Optical/Infrared Surveyor (LUVOIR).

Review and update of WFIRST Coronagraph Instrument Design and Technology Richard T. Demers Jet Propulsion Laboratory, California Institute of Technology, 4800 Oak Grove Drive, Pasadena 91109, CA ABSTRACT NASA’s Wide Field InfraRed Survey Telescope (WFIRST) is a proposed flagship astrophysical observatory that would investigate dark energy, carry out wide-field near infrared (NIR) galactic surveys, and image and characterize extrasolar planets in visible reflected light. The WFIRST observatory would utilize an existing 2.4-m aperture telescope integrated with a baseline Coronagraph Instrument to image and spectrally characterize extrasolar planets in visible reflected light. The WFIRST Coronagraph is designed to directly image and characterize mature planets analogous to those in our solar system. In so doing it would advance what is currently possible in exoplanet spectral characterization and imaging using innovative wavefront and pointing jitter sensing and control algorithms, photolithographically fabricated pupil and occulting masks, precise mask positioning mechanisms, a fast steering mirror mechanism, state of the art polished optics, high actuator count deformable mirrors, electron multiplying CCDs and a lenslet-based integral field spectrograph. We present the system design concept and an overview of the current formulation phase design including structural, thermal, optical, pointing and wavefront controls as well as development of deformable mirrors and detectors for the science and engineering cameras.

As it has for the past few years, numerical modeling is being used to predict the on-orbit, high-contrast imaging performance of the WFIRST coronagraph, which was recently defined to be a technology demonstrator with science capabilities. A consequence has been a realignment of modeling priorities and revised applications of modeling uncertainty factors and margins, which apply to multiple factors such as pointing and wavefront jitter, thermally-induced deformations, polarization, and aberration sensitivities. At the same time, the models have increased in fidelity as additional parameters have been added, such as time-dependent pupil shear and mid-spatial-frequency deformations of the primary and secondary mirrors, detector effects, and reaction-wheel-speed-dependent pointing and wavefront jitter.

A high-accuracy high-fidelity flight wavefront control (WFC) model is developed for detailed WFIRST-CGI raw contrast sensitivity analysis. Built upon features of recently testbed validated model, it is further refined to combine a full Fresnel propagation diffraction model for high accuracy contrast truth evaluation, and an economical compact model for WFC purposes. Extensive individual raw contrast error sensitivities are evaluated systematically, both as known imperfections and as unknown calibration errors, for two CGI modes: spectroscopy mode and wide field-of-view mode with shaped pupil coronagraph. More than 90 distinct error items were identified, including system aberrations, optical misalignment, component fabrication errors, telescope interface related errors, etc. The result forms the basis for raw contrast error budget flow down to a sub-system level, where detailed specifications needed to aid in component design and manufacturing, mechanical alignment and instrument integration, and verification and validation operations. Evaluations are automated, making it relatively easy for repeat runs of revised design or at new desired error quantity. Observations from the comprehensive analysis and top error sensitivities and contrast floor contributors are noted and discussed. Error budget flowdown process is also briefly described.

A large fraction of Sun-like stars is contained in binary systems. Within 10pc there are 70 FGK stars, out of which 43 belong to a multi-star system, and 28 have companion leak that is greater than 1e-9 contrast, assuming typical Hubble-quality space optics. Currently, those binary stars are not included in the WFIRST-CGI target list, but they could be observed if high-contrast imaging around binary star systems using WFIRST is possible, potentially significantly increasing the number of possible FGK targets. The Multi-Star Wavefront Control (MSWC) algorithm can be used to suppress the companion star leakage. If the targets have angular separations larger than the Nyquist controllable region of the Deformable Mirror, MSWC must operate in its Super-Nyquist (SN) mode. This mode requires a target star replica within the SN region in order to provide the ability to null speckles at SN angular separations. For the case of WFIRST, more than half of the targets that can be observed using MSWC, including Alpha Centauri, have angular separations larger than the Nyquist controllable region of the 48x48 actuator Deformable Mirror (DM) to be used. Here, we discuss multiple alternatives to generate those PSF replicas with minimal or no impact to the WFIRST Coronagraph instrument, such as: 1) the addition of a movable diffractive pupil mounted on the Shaped Pupil wheel; 2) design of a modified Shape Pupil capable of creating a dark zone and at the same time diffracting a small fraction of the starlight on the SN region; 3) predicting the minimum residual quilting on the WFIRST DM that would allow observing a given target.

To maintain the required performance for the WFIRST Coronagraph Instrument (CGI) in a realistic space environment, a Low Order Wavefront Sensing and Control (LOWFS/C) subsystem is necessary. The WFIRST CGI LOWFS/C subsystem will use the Zernike wavefront sensor, which has a phase-shifting disk combined with the coronagraph’s focal plane mask, to sense the low-order wavefront drift and line-of-sight (LoS) error using the rejected starlight. The dynamic tests on JPL’s Occulting Mask Coronagraph (OMC) Testbed have demonstrated that LOWFS/C can maintain coronagraph contrast to better than 10^-8 in presence of WFIRST-like line of sight and low order wavefront disturbances in both Shaped Pupil Coronagraph (SPC) and Hybrid Lyot Coronagraph (HLC) modes. However, the previous dynamic tests have been done using a bright source with photon flux equivalent to stellar magnitude of MV = -3.5. The LOWFS/C technology development on the OMC testbed has since then concentrated in evaluating and improving the LOWFS/C performance under the realistic photon flux that is equivalent to WFIRST Coronagraph target stars. Our recent testbed tests have demonstrated that the LOWFS/C can work cohesively with the stellar light suppression wavefront control, which brings broad band coronagraph contrast from ~1x10^-6 to 6x10^-9, while LOWF/C is simultaneously suppressing the WFIRST like LoS and low order wavefront drift disturbances on a source that photon flux is equivalent to a MV = 2 star. This lab demonstration mimics the CGI initial dark hole establish process on a bright reference star. We have also demonstrated on the testbed that LOWFS/C can maintain the coronagraph contrast by suppressing the WFIRST like line-of-sight disturbances on a fainter MV = 5 star. This mimics scenario of CGI science target observations. In this paper we will present the recent dynamic testbed performance results of LOWFS/C LoS loops and low order wavefront error correction loop on the flight like photon flux.

In order to validate required operation of the proposed Wide-Field InfraRed Survey Telescope (WFIRST) coronagraph instrument, we have built a testbed in Jet Propulsion Laboratory (JPL), which is analogous to the baseline WFIRST coronagraph instrument architecture. Since its birth in 2016, this testbed, named as Occulting Mask Coronagraph (OMC) testbed, has demonstrated several crucial technological milestones: Broadband high contrast demonstration in both Hybrid Lyot Coronagraph (HLC) and Shape Pupil Coronagraph (SPC) modes while the Low Order Wavefront Sensing and Control (LOWFS/C) subsystem senses and corrects the dynamic flight-like wavefront disturbances. In this paper, we present up-to-date progress of HLC mode demonstration in the OMC testbed. While injecting the flight-like low photon flux starlight with expected Line of Sight (LoS) and Wavefront Error (WFE) perturbation to the OMC testbed, we demonstrate generating high contrast dark hole images. We first study the expected photon flux in actual flight environment, and estimate detection noise and estimation accuracy of the complex electric field if the wavefront sensing algorithm is used based on the pair-wise difference imaging. Then, we introduce our improved scheme to mitigate this photon-starved flight-like low flux environment. As a result, we generate a dark hole that meets the WFIRST raw contrast requirements using the 2nd magnitude star light. We establish the key ideas, describe test setups, and demonstrate test results with data analysis.

Exoplanet imaging requires super polished off-axis parabolas (OAP) with the utmost surface quality. In this paper we describe an innovative manufacturing process combining 3D printing and stress polishing, to create a warping harness capable of producing any off axis parabola profile with a single actuator. The warping harness is manufactured by 3D printing. This method will be applied to the production of the WFIRST coronagraph's off axis parabolas. The evolution of the warping harness design is presented, starting from a ring warping harness generating astigmatism, to an innovative thickness distribution harness optimised to generate an off axis parabola shape. Several design options are available for the prototyping phase, with their advantages and disadvantages which will be discussed.

The Optimal Optical Coronagraph (OOC) Workshop at the Lorentz Center in September 2017 in Leiden, the Netherlands gathered a diverse group of 25 researchers working on exoplanet instrumentation to stimulate the emergence and sharing of new ideas. In this first installment of a series of three papers summarizing the outcomes of the OOC workshop, we present an overview of design methods and optical performance metrics developed for coronagraph instruments. The design and optimization of coronagraphs for future telescopes has progressed rapidly over the past several years in the context of space mission studies for Exo-C, WFIRST, HabEx, and LUVOIR as well as ground-based telescopes. Design tools have been developed at several institutions to optimize a variety of coronagraph mask types. We aim to give a broad overview of the approaches used, examples of their utility, and provide the optimization tools to the community. Though it is clear that the basic function of coronagraphs is to suppress starlight while maintaining light from off-axis sources, our community lacks a general set of standard performance metrics that apply to both detecting and characterizing exoplanets. The attendees of the OOC workshop agreed that it would benefit our community to clearly define quantities for comparing the performance of coronagraph designs and systems. Therefore, we also present a set of metrics that may be applied to theoretical designs, testbeds, and deployed instruments. We show how these quantities may be used to easily relate the basic properties of the optical instrument to the detection significance of the given point source in the presence of realistic noise.

The ESA formation Flying mission Proba-3 will y the giant solar coronagraph ASPIICS. The instrument is composed of a 1.4 meter diameter external occulting disc mounted on the Occulter Spacecraft and a Lyot-style solar coronagraph of 50mm diameter aperture carried by the Coronagraph Spacecraft positioned 144 meters behind. The system will observe the inner corona of the Sun, as close as 1.1 solar radius. For a solar coronagraph, the most critical source of straylight is the residual diffracted sunlight, which drives the scientific performance of the observation. This is especially the case for ASPIICS because of its reduced field-of-view close to the solar limb. The light from the Sun is first diffracted by the edge of the external occulter, and then propagates and scatters inside the instrument. There is a crucial need to estimate both intensity and distribution of the diffraction on the focal plane. Because of the very large size of the coronagraph, one cannot rely on representative full scale test campaign. Moreover, usual optics software package are not designed to perform such diffraction computation, with the required accuracy. Therefore, dedicated approaches have been developed in the frame of ASPIICS. First, novel numerical models compute the diffraction profile on the entrance pupil plane and instrument detector plane (Landini et al., Rougeot et al.), assuming perfect optics in the sense of multi-reflection and scattering. Results are confronted to experimental measurements of diffraction. The paper reports the results of the different approaches.