Paper
29 December 1981 Technical Issues In Focal Plane Development For Terrestrial Resource Observations
Leslie L. Thompson
Author Affiliations +
Proceedings Volume 0282, Technical Issues in Focal Plane Development; (1981) https://doi.org/10.1117/12.931975
Event: 1981 Technical Symposium East, 1981, Washington, D.C., United States
Abstract
The use of solid-state detector arrays which operate in a pushbroom scan mode for remote sensing of the Earth's resources and environment has received increased attention in the last several years. The potential for improved radiometric sensitivity, geometrical accuracy and signal processing permit consideration of new levels of sensor performance in the areas of spatial resolution, spectral resolution, mapping accuracy, and improved system throughput of data products. These benefits depend on the ability to manufacture and accurately align thousands of detectors into a multispectral focal plane. Two key performance goals are to achieve: (1) radiometric calibration to 0.5% precision detector-to-detector over a dynamic range of 1000:1; and (2) geometric alignment to place the detector elements to within 0.1 resolution element of their desired perfect positions. System cost (including the ground segment) and complexity should be traded against these goals. Science experiments continue to be needed to establish the tolerances on these goals.
© (1981) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Leslie L. Thompson "Technical Issues In Focal Plane Development For Terrestrial Resource Observations", Proc. SPIE 0282, Technical Issues in Focal Plane Development, (29 December 1981); https://doi.org/10.1117/12.931975
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Calibration

Tolerancing

Manufacturing

Remote sensing

Spectral resolution

Reflectivity

Back to Top