Paper
1 March 1983 Perfect Optical Compensator With 1:1 Shutter Ratio Used For High Speed Camera
Rong Zhihong
Author Affiliations +
Proceedings Volume 0348, 15th Intl Congress on High Speed Photography and Photonics; (1983) https://doi.org/10.1117/12.967714
Event: 15th International Congress on High Speed Photography and Photonics, 1982, San Diego, United States
Abstract
An optical compensator used for high speed camera is described. The method of compensation, the analysis of the imaging quality and the result of experiment are introduced. The compensator consists of pairs of parallel mirrors. It can perform perfect compensation even at 1:1 shutter ratio. Using this compensator a high speed camera can be operated with no shutter and can obtain the same image sharpness as that of the intermittent camera. The advantages of this compensator are summarized as follows: . While compensating, the aberration correction of the objective would not be damaged. . There is no displacement and defocussing between the scanning image and the film in frame center during compensation. Increasing the exposure angle doesn't reduce the resolving power. . The compensator can also be used in the projector in place of the intermittent mechanism to practise continuous (non-intermittent) projection without shutter.
© (1983) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rong Zhihong "Perfect Optical Compensator With 1:1 Shutter Ratio Used For High Speed Camera", Proc. SPIE 0348, 15th Intl Congress on High Speed Photography and Photonics, (1 March 1983); https://doi.org/10.1117/12.967714
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Cameras

Camera shutters

Spectral resolution

High speed cameras

High speed photography

Image quality

RELATED CONTENT


Back to Top