Paper
20 August 1986 Steps Toward 8M Honeycomb Mirrors VIII: Design And Demonstration Of A System Of Thermal Control
A.Y. S. Cheng, J. R. P. Angel
Author Affiliations +
Abstract
If they are to achieve the best possible images, honeycomb borosilicate telescope mirrors must follow ambient temperature changes while maintaining low internal temperature gradients. This is best done by cooling or heating the internal, edge and back mirror surfaces at the same rate established by convection on the front surface. We propose to use directed jets of air at ambient temperature, arranged with more air flow on thicker sections so as to match cooling rates. A full scale glass thermal model of one honeycomb cell of an 8m mirror was built, along with a system to flow in air at controlled temperature. We find that the air jets realize high thermal coupling efficiency, and allow good control of internal gradients.' With the air cooling steadily at 0.25°C/hour, typical of nighttime cooling at good sites, internal gradients were < 0.1°C and the overall lag between air and glass temperature was 0.25°C. This performance, achieved with a flow rate of 6-10 liters/sec per cell, will ensure negligible image degradation from convection at the mirror surface (mirror seeing) or from thermal distortion of the mirror substrate.
© (1986) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A.Y. S. Cheng and J. R. P. Angel "Steps Toward 8M Honeycomb Mirrors VIII: Design And Demonstration Of A System Of Thermal Control", Proc. SPIE 0628, Advanced Technology Optical Telescopes III, (20 August 1986); https://doi.org/10.1117/12.963577
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Glasses

Temperature metrology

Control systems

Thermoelectric materials

Servomechanisms

Optical telescopes

RELATED CONTENT


Back to Top