Paper
9 August 1988 Production And Evaluation Of Super-Smooth Dip-Coated Foils For High Throughput X-Ray Telescopes
L. Jalota, R. Willingale
Author Affiliations +
Abstract
High throughput X-ray telescopes require thin mirrors with super-smooth surfaces, typically with rms surface roughnesses of 5 A. The simple and inexpensive process of coating a suitable substrate with an acrylic lacquer to achieve a high quality surface finish is discussed. The surface roughnesses of several candidate materials, including rolled aluminium foil, polyester sheet, and diamond turned flats have been investigated. The surfaces, both before and after coating, have been examined by X-ray scattering measurements. Surface roughness in the spatial frequency range 2 - 70 mm-1 is attenuated by up to a factor of 7. Below 2 mm-1 the lacquer is unable to reduce the roughness and actually degrades the surface quality. The polyester surface has a roughness of 11 A rms in the spatial frequency range 18 - 70 mm-1 but suffers from large profile errors probably introduced by mounting the sample.
© (1988) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
L. Jalota and R. Willingale "Production And Evaluation Of Super-Smooth Dip-Coated Foils For High Throughput X-Ray Telescopes", Proc. SPIE 0830, Grazing Incidence Optics for Astronomical and Laboratory Applications, (9 August 1988); https://doi.org/10.1117/12.942180
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Coating

Scattering

Spatial frequencies

Mirrors

Modulation transfer functions

Diamond

Surface roughness

Back to Top