Translator Disclaimer
Paper
23 March 1988 Sensing Of High Pressure By Shock Heating Quartz Optical Fibers
Author Affiliations +
Proceedings Volume 0838, Fiber Optic and Laser Sensors V; (1988) https://doi.org/10.1117/12.942490
Event: Cambridge Symposium on Fiber Optics and Integrated Optoelectronics, 1987, Cambridge, MA, United States
Abstract
We report the use of bare optical fibers to detect shock arrival times and shock pressures in the collision of a moving flyer plate with a stationary plate. Glass fibers were either laid on the surface of the stationary plate or put through closely fitting holes so that they were perpendicular to the plate, with their cleaved ends flush with the surface being struck by the flyer. The flyer, moving at 5 km/s, struck the stationary plate at an angle of 6.7°. The phase velocity of the line of Intersection, measured from the times of light onset in fibers at different positions, moved at over 40 km/s along the direction of the surface fibers. All of the fibers were shock heated to about 3600K, producing enough light to allow detection by optical receivers viewing the other ends of the fibers. By being reasonably careful about calibrating the absolute transmission of the optical system, we were able to obtain good estimates of the quartz temperature and pressure as a function of time and position along the surface fibers. (We assume that only the light from near the shock front emerges.) By fusing a short piece of smaller-core-fiber to the end of a surface fiber, we were able to get two signals from one fiber and deduce an instantaneous phase velocity. The perpendicular fibers gave understandable signals only during the time the shock ran through the stationary plate.
© (1988) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
L. R. Veeser, M. J. George, R. Menikoff, B. Papatheofanis, J. S. McGurn, and P. L. Gobby "Sensing Of High Pressure By Shock Heating Quartz Optical Fibers", Proc. SPIE 0838, Fiber Optic and Laser Sensors V, (23 March 1988); https://doi.org/10.1117/12.942490
PROCEEDINGS
9 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Near-infrared fiber optic temperature sensor
Proceedings of SPIE (December 01 1991)
Embedded polarimetric differential stress sensor
Proceedings of SPIE (March 09 1994)
Dual-diaphragm fiber optic pressure sensor
Proceedings of SPIE (March 09 1994)
Optical Fiber Security System : A Field Test Report
Proceedings of SPIE (March 23 1988)
General purpose fiber optic hydrophone made of castable epoxy
Proceedings of SPIE (February 01 1991)

Back to Top