Presentation + Paper
17 February 2017 Ultrashort pulse laser welding of glasses without optical contacting
Author Affiliations +
Abstract
We report on ultrashort pulse induced welding of fused silica without previously optical contacting of the samples. We used a TruMicro 2020 by TRUMPF delivering bursts of intense ultrashort laser pulses with an individual pulse energy of up to 10 μJ, an intraburst pulse separation of 20 ns and a burst repetition rate of 200 kHz. With this setup we could realize a large pool of molten material with a length of up to 450 μm and a diameter of around 160 μm. If the laser focus is placed near the surface of a glass sample the low viscosity of the hot material induces bulging of the surface and ejection of the molten material. This molten material can be used to fill a gap of up to 3 μm between fused silica samples.

We also determined the breaking strength with a three-point bending test. The determined maximal value of 73 MPa is equivalent to 85% of the stability of the pristine bulk material.
Conference Presentation
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sören Richter, Felix Zimmermann, Dirk Sutter, Aleksander Budnicki, Andreas Tünnermann, and Stefan Nolte "Ultrashort pulse laser welding of glasses without optical contacting", Proc. SPIE 10094, Frontiers in Ultrafast Optics: Biomedical, Scientific, and Industrial Applications XVII, 1009411 (17 February 2017); https://doi.org/10.1117/12.2250389
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Glasses

Laser welding

Ultrafast phenomena

Silica

Absorption

Interfaces

Pulsed laser operation

Back to Top