Response functions of multi-pixel-type CdTe detector: toward development of precise material identification on diagnostic x-ray images by means of photon counting

Hiroaki Hayashi; Takashi Asahara; Natsumi Kimoto; Yuki Kanazawa; Tsutomu Yamakawa; Shuichiro Yamamoto; Masashi Yamasaki; Masahiro Okada

doi:10.1117/12.2251185

9 March 2017 Response functions of multi-pixel-type CdTe detector: toward development of precise material identification on diagnostic x-ray images by means of photon counting

Hiroaki Hayashi, Takashi Asahara, Natsumi Kimoto, Yuki Kanazawa, Tsutomu Yamakawa, Shuichiro Yamamoto, Masashi Yamasaki, Masahiro Okada

Author Affiliations +

Proceedings Volume 10132, Medical Imaging 2017: Physics of Medical Imaging; 1013236 (2017) https://doi.org/10.1117/12.2251185
Event: SPIE Medical Imaging, 2017, Orlando, Florida, United States

Abstract

Currently, an X-ray imaging system which can produced information used to identify various materials has been developed based on photon counting. It is important to estimate the response function of the detector in order to accomplish highly accurate material identification. Our aim is to simulate the response function of a CdTe detector using Monte-Carlo simulation; at this time, the transportation of incident and scattered photons and secondary produced electrons were precisely simulated without taking into consideration the charge spread in the collecting process of the produced charges (charge sharing effect). First, we set pixel sizes of 50-500μm, the minimum irradiation fields which produce equilibrium conditions were determined. Then, observed peaks in the response function were analyzed with consideration paid to the interactions between incident X-rays and the detector components, Cd and Te. The secondary produced characteristic X-rays play an important role. Accordingly ratios of full energy peak (FEP), scattering X-rays and penetrating X-rays in the calculated response functions were analyzed. When the pixel size of 200μm was used the scattered X-rays were saturated at equilibrium with relatively small fields and efficiency of FEP was kept at a high value (<50%). Finally, we demonstrated the X-ray spectrum which is folded by the response function. Even if the charge sharing effect is not completely corrected when using the electric circuit, there is a possibility that disturbed portions in the measured X-ray spectra can be corrected by using proper calibration, in which the above considerations are taken into account.

Citation Download Citation

Hiroaki Hayashi, Takashi Asahara, Natsumi Kimoto, Yuki Kanazawa, Tsutomu Yamakawa, Shuichiro Yamamoto, Masashi Yamasaki, and Masahiro Okada "Response functions of multi-pixel-type CdTe detector: toward development of precise material identification on diagnostic x-ray images by means of photon counting", Proc. SPIE 10132, Medical Imaging 2017: Physics of Medical Imaging, 1013236 (9 March 2017); https://doi.org/10.1117/12.2251185

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available