Design optimization for accurate flow simulations in 3D printed vascular phantoms derived from computed tomography angiography

Kelsey Sommer; Rick L. Izzo; Lauren Shepard; Alexander R. Podgorsak; Stephen Rudin; Adnan H. Siddiqui; Michael F. Wilson; Erin Angel; Zaid Said; Michael Springer; Ciprian N. Ionita

doi:10.1117/12.2253711

13 March 2017 Design optimization for accurate flow simulations in 3D printed vascular phantoms derived from computed tomography angiography

Kelsey Sommer, Rick L. Izzo, Lauren Shepard, Alexander R. Podgorsak, Stephen Rudin, Adnan H. Siddiqui, Michael F. Wilson, Erin Angel, Zaid Said, Michael Springer, Ciprian N. Ionita

Author Affiliations +

Proceedings Volume 10138, Medical Imaging 2017: Imaging Informatics for Healthcare, Research, and Applications; 101380R (2017) https://doi.org/10.1117/12.2253711
Event: SPIE Medical Imaging, 2017, Orlando, Florida, United States

Abstract

3D printing has been used to create complex arterial phantoms to advance device testing and physiological condition evaluation. Stereolithographic (STL) files of patient-specific cardiovascular anatomy are acquired to build cardiac vasculature through advanced mesh-manipulation techniques. Management of distal branches in the arterial tree is important to make such phantoms practicable. We investigated methods to manage the distal arterial flow resistance and pressure thus creating physiologically and geometrically accurate phantoms that can be used for simulations of image-guided interventional procedures with new devices. Patient specific CT data were imported into a Vital Imaging workstation, segmented, and exported as STL files. Using a mesh-manipulation program (Meshmixer) we created flow models of the coronary tree. Distal arteries were connected to a compliance chamber. The phantom was then printed using a Stratasys Connex3 multimaterial printer: the vessel in TangoPlus and the fluid flow simulation chamber in Vero. The model was connected to a programmable pump and pressure sensors measured flow characteristics through the phantoms. Physiological flow simulations for patient-specific vasculature were done for six cardiac models (three different vasculatures comparing two new designs). For the coronary phantom we obtained physiologically relevant waves which oscillated between 80 and 120 mmHg and a flow rate of ~125 ml/min, within the literature reported values. The pressure wave was similar with those acquired in human patients. Thus we demonstrated that 3D printed phantoms can be used not only to reproduce the correct patient anatomy for device testing in image-guided interventions, but also for physiological simulations. This has great potential to advance treatment assessment and diagnosis.

Conference Presentation

Citation Download Citation

Kelsey Sommer, Rick L. Izzo, Lauren Shepard, Alexander R. Podgorsak, Stephen Rudin, Adnan H. Siddiqui, Michael F. Wilson, Erin Angel, Zaid Said, Michael Springer, and Ciprian N. Ionita "Design optimization for accurate flow simulations in 3D printed vascular phantoms derived from computed tomography angiography", Proc. SPIE 10138, Medical Imaging 2017: Imaging Informatics for Healthcare, Research, and Applications, 101380R (13 March 2017); https://doi.org/10.1117/12.2253711

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE