Broadband optoacoustic characterization of cMUT and PZT transducer directivity in receive mode

Johannes Rebling; Omri Warshavski; Cyril Meynier; Daniel Razansky

doi:10.1117/12.2253850

13 March 2017 Broadband optoacoustic characterization of cMUT and PZT transducer directivity in receive mode

Johannes Rebling, Omri Warshavski, Cyril Meynier, Daniel Razansky

Author Affiliations +

Proceedings Volume 10139, Medical Imaging 2017: Ultrasonic Imaging and Tomography; 101391K (2017) https://doi.org/10.1117/12.2253850
Event: SPIE Medical Imaging, 2017, Orlando, Florida, United States

Abstract

Optoacoustic imaging is a rapidly developing area of biomedical imaging due its combination of rich optical contrast and ultrasound depth penetration. Just like conventional pulse-echo ultrasound imaging, optoacoustic tomography relies on the use of ultrasound detector arrays with a large number of elements. The precise knowledge of the transducer’s sensitivity is crucial for the prediction of its performance for a given imaging task. Sensitivity characteristics such as the central frequency and bandwidth are routinely characterized. However, this characterization is typically performed solely under normal incidence since the measurement of the angle and frequency depended sensitivity (directivity) is difficult and time consuming with existing ultrasound characterization methods. We present a simple and fast characterization method for broadband directivity measurements of the angular transducer sensitivity based on the optoacoustic effect. The method utilizes a thin absorbing suture in order to generate omnidirectional and broadband optoacoustic signals, which are calibrated using a needle hydrophone. We applied this method to characterize and compare the directivity of a conventional piezoelectric (PZT) transducer to the directivity of a capacitive micromachined ultrasonic (cMUT) transducer. Both technologies showed a similar broadband response at normal incidence and the PZT transducer displayed a more than two times larger signal to noise ratio at normal incidence. However, the cMUT transducer’s sensitivity was significantly less angle-depended and outperformed the PZT’s sensitivity for angles larger than 20°.

Citation Download Citation

Johannes Rebling, Omri Warshavski, Cyril Meynier, and Daniel Razansky "Broadband optoacoustic characterization of cMUT and PZT transducer directivity in receive mode", Proc. SPIE 10139, Medical Imaging 2017: Ultrasonic Imaging and Tomography, 101391K (13 March 2017); https://doi.org/10.1117/12.2253850

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE