An OCD perspective of line edge and line width roughness metrology

Ravi Bonam; Raja Muthinti; Mary Breton; Chi-Chun Liu; Stuart Sieg; Indira Seshadri; Nicole Saulnier; Jeffrey Shearer; Raghuveer Patlolla; Huai Huang

doi:10.1117/12.2258196

28 March 2017 An OCD perspective of line edge and line width roughness metrology

Ravi Bonam, Raja Muthinti, Mary Breton, Chi-Chun Liu, Stuart Sieg, Indira Seshadri, Nicole Saulnier, Jeffrey Shearer, Raghuveer Patlolla, Huai Huang

Author Affiliations +

Proceedings Volume 10145, Metrology, Inspection, and Process Control for Microlithography XXXI; 1014511 (2017) https://doi.org/10.1117/12.2258196
Event: SPIE Advanced Lithography, 2017, San Jose, California, United States

Abstract

Metrology of nanoscale patterns poses multiple challenges that range from measurement noise, metrology errors, probe size etc. Optical Metrology has gained a lot of significance in the semiconductor industry due to its fast turn around and reliable accuracy, particularly to monitor in-line process variations. Apart from monitoring critical dimension, thickness of films, there are multiple parameters that can be extracted from Optical Metrology models3. Sidewall angles, material compositions etc., can also be modeled to acceptable accuracy. Line edge and Line Width roughness are much sought of metrology following critical dimension and its uniformity, although there has not been much development in them with optical metrology. Scanning Electron Microscopy is still used as a standard metrology technique for assessment of Line Edge and Line Width roughness. In this work we present an assessment of Optical Metrology and its ability to model roughness from a set of structures with intentional jogs to simulate both Line edge and Line width roughness at multiple amplitudes and frequencies. We also present multiple models to represent roughness and extract relevant parameters from Optical metrology. Another critical aspect of optical metrology setup is correlation of measurement to a complementary technique to calibrate models. In this work, we also present comparison of roughness parameters extracted and measured with variation of image processing conditions on a commercially available CD-SEM tool.

Citation Download Citation

Ravi Bonam, Raja Muthinti, Mary Breton, Chi-Chun Liu, Stuart Sieg, Indira Seshadri, Nicole Saulnier, Jeffrey Shearer, Raghuveer Patlolla, and Huai Huang "An OCD perspective of line edge and line width roughness metrology", Proc. SPIE 10145, Metrology, Inspection, and Process Control for Microlithography XXXI, 1014511 (28 March 2017); https://doi.org/10.1117/12.2258196

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available