You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
11 November 2016Crude oil specific gravity sensor design using polymer optical fiber with structural imperfection
Crude oil is a products of oil and gas industries. One of the parameters which has in crude oil is specific gravity. In the oil and gas industries, specific gravity is used to classify crude oil which to be produced. specific gravity can be measured using ASTM D-1298 method. Disadvantage of this method is there are need of special environments and still using manual transcription. This research has been conducted a crude oil specific gravity sensor design by implementing structural imperfect to improve the performance of specific gravity sensors. In this research, polymer optical fiber is used as a sensor to measure specific gravity of crude oil. There are three variation of the amount of defect that were used in this research. Sample which used in this research has span of specific gravity value from 0,842218 to 0,9097. Based on the result, sensor with 3 imperfect structure have the best performance with linearity coefficient value 0,9438 and the span of measurement is 1,75792 dBm.
Junivan Sulistianto,Agus M. Hatta, andIr. Sekartedjo
"Crude oil specific gravity sensor design using polymer optical fiber with structural imperfection", Proc. SPIE 10150, Second International Seminar on Photonics, Optics, and Its Applications (ISPhOA 2016), 101500P (11 November 2016); https://doi.org/10.1117/12.2248492
The alert did not successfully save. Please try again later.
Junivan Sulistianto, Agus M. Hatta, Ir. Sekartedjo, "Crude oil specific gravity sensor design using polymer optical fiber with structural imperfection," Proc. SPIE 10150, Second International Seminar on Photonics, Optics, and Its Applications (ISPhOA 2016), 101500P (11 November 2016); https://doi.org/10.1117/12.2248492