You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
11 November 2016The effect of packaging material on optical fiber temperature sensor with singlemode multimode singlemode (SMS) structure
In this paper, investigation of the effect of packaging material on optical fiber temperature sensor with single-mode multimode single-mode (SMS) structure has been done. First, the optimum length of multimode fiber that will be used as temperature sensor is chosen. The tests of SMS temperature sensor have done by using simple measurement system of intensity. The results show that the 42.63 mm length of step-index multimode fiber has a better performance than length 44.12 mm based on theoretical and experiment. After that, SMS optical fiber packaged with material. The materials of packaging are alumunium and stainless steel. The results show that after using packaging, the sensitivity of sensor has been inmproved. It is caused by the thermal expansion coefficient of packaging material. The highest sensitivity is obtained by using alumunium packaging. The sensitivity bare SMS optical fiber is 0.033 dBm/°C by theoretical and 0.066 dBm/°C by experiment. The sensitivity of SMS optical fiber packaged improve to 0.073 dBm/°C by theoretical and 0.176 dBm/°C by experiment.
The alert did not successfully save. Please try again later.
Ashri Khusnul Chotimah, Agus Muhamad Hatta, Detak Yan Pratama, "The effect of packaging material on optical fiber temperature sensor with singlemode multimode singlemode (SMS) structure," Proc. SPIE 10150, Second International Seminar on Photonics, Optics, and Its Applications (ISPhOA 2016), 101501C (11 November 2016); https://doi.org/10.1117/12.2248487