To achieve the goal of a high flux density the spot size on the anode of the X-ray tube should be as small as possible with a simultaneous increase of the X-ray power. A risk is the melting of the anode due to weak heat dissipation. At the same time the figure error of the multilayer mirror should be as low as possible. Large figure errors will increase the spot size of the X-ray beam at the sample position.
You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.