The study of optimization on process parameters of high-accuracy computerized numerical control polishing

Wei-Ren Huang; Shih-Pu Huang; Tsung-Yueh Tsai; Yi-Jyun Lin; Zong-Ru Yu; Ching-Hsiang Kuo; Wei-Yao Hsu; Hong-Tsu Young

doi:10.1117/12.2272529

5 September 2017 The study of optimization on process parameters of high-accuracy computerized numerical control polishing

Wei-Ren Huang, Shih-Pu Huang, Tsung-Yueh Tsai, Yi-Jyun Lin, Zong-Ru Yu, Ching-Hsiang Kuo, Wei-Yao Hsu, Hong-Tsu Young

Author Affiliations +

Proceedings Volume 10401, Astronomical Optics: Design, Manufacture, and Test of Space and Ground Systems; 104011B (2017) https://doi.org/10.1117/12.2272529
Event: SPIE Optical Engineering + Applications, 2017, San Diego, California, United States

Abstract

Spherical lenses lead to forming spherical aberration and reduced optical performance. Consequently, in practice optical system shall apply a combination of spherical lenses for aberration correction. Thus, the volume of the optical system increased. In modern optical systems, aspherical lenses have been widely used because of their high optical performance with less optical components. However, aspherical surfaces cannot be fabricated by traditional full aperture polishing process due to their varying curvature. Sub-aperture computer numerical control (CNC) polishing is adopted for aspherical surface fabrication in recent years. By using CNC polishing process, mid-spatial frequency (MSF) error is normally accompanied during this process. And the MSF surface texture of optics decreases the optical performance for high precision optical system, especially for short-wavelength applications. Based on a bonnet polishing CNC machine, this study focuses on the relationship between MSF surface texture and CNC polishing parameters, which include feed rate, head speed, track spacing and path direction. The power spectral density (PSD) analysis is used to judge the MSF level caused by those polishing parameters. The test results show that controlling the removal depth of single polishing path, through the feed rate, and without same direction polishing path for higher total removal depth can efficiently reduce the MSF error. To verify the optical polishing parameters, we divided a correction polishing process to several polishing runs with different direction polishing paths. Compare to one shot polishing run, multi-direction path polishing plan could produce better surface quality on the optics.

Citation Download Citation

Wei-Ren Huang, Shih-Pu Huang, Tsung-Yueh Tsai, Yi-Jyun Lin, Zong-Ru Yu, Ching-Hsiang Kuo, Wei-Yao Hsu, and Hong-Tsu Young "The study of optimization on process parameters of high-accuracy computerized numerical control polishing", Proc. SPIE 10401, Astronomical Optics: Design, Manufacture, and Test of Space and Ground Systems, 104011B (5 September 2017); https://doi.org/10.1117/12.2272529

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
6 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Polishing

Surface finishing

Optics manufacturing

Spherical lenses

Aberration correction

Aspheric lenses

Control systems

Show All Keywords

Keywords/Phrases

Search In:

Publication Years