Recent improvements in LIDT of optical components for pulsed and CW applications

Christian Grunert; Martin Rumpel; Marwan Abdou Ahmed; Lars Mechold

doi:10.1117/12.2292992

13 November 2017 Recent improvements in LIDT of optical components for pulsed and CW applications

Christian Grunert, Martin Rumpel, Marwan Abdou Ahmed, Lars Mechold

Author Affiliations +

Proceedings Volume 10447, Laser-Induced Damage in Optical Materials 2017; 104472F (2017) https://doi.org/10.1117/12.2292992
Event: SPIE Laser Damage, 2017, Boulder, Colorado, United States

Abstract

Today the laser induced damage threshold (LIDT) is one of the most important properties of laser components. As laser systems reach higher and higher optical power densities, optical components with improved LIDT values are highly required and their characterization has gained an ever-increasing importance. Many optical components rely on multilayer coating sequences of dielectric materials. Therefore, several design strategies such as the rugate and RISED concept have been applied for highly reflecting layer systems for the design wavelength of 1030 nm and an angle of incidence of 44°. The investigations were based on IBS and PIAD deposition methods using HfO₂ and SiO₂ for high respectively low refractive index material. A movable zone target was used for IBS in order to allow for direct material mixing to obtain for the rugate and mixed design continuous variations in the refractive index. The IBS designs have been tested for the LIDT at 560 fs and s-polarization and compared to those produced by PIAD. The designs were also tested in cw operation. The highest values for LIDT in pulsed conditions have been found for mixed IBS and PIAD designs with average values up to 2 J/cm² at 1-on-1 test. The best results at 10⁵ -on-1 test have been achieved by rugate designs with a LIDT of > 1.3 J/cm² . In CW operation, the samples could be subjected to power densities of up to 1 MW/cm² without the notification of any damage.

Citation Download Citation

Christian Grunert, Martin Rumpel, Marwan Abdou Ahmed, and Lars Mechold "Recent improvements in LIDT of optical components for pulsed and CW applications", Proc. SPIE 10447, Laser-Induced Damage in Optical Materials 2017, 104472F (13 November 2017); https://doi.org/10.1117/12.2292992

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE