Translator Disclaimer
14 March 2018 Graphene-multilayer-saturable-absorber-based passively mode-locked Ho-doped fiber front-end for seeding of a 1-J/1-kW Ho:YAG cryogenically cooled thin-disk laser system (Conference Presentation)
Author Affiliations +
Hi-tech industrial or biotechnological laser applications request for picosecond pulsed 2-um laser generating sub-1-J pulses in >kHz repetition range. At Hilase development of laser system with target to generate 1-J picosecond pulses with 1-kHz repetition rate has started. Design of the system based on Ho:YAG thin-disk generating at 2.1-um is divided into several phases. First phase includes demonstration of new mode-locked graphen-based saturable absorber Ho-doped fiber laser concept followed by preamplifier systems delivering 10-uJ pulses. Pulses are then amplified to >10-mJ level in Ho:YAG thin-disk regenerative amplifier operating at 10-kHz, and finally amplified in double stage cryogenically-cooled multi-pass amplifier to 1-J at 1-kHz so average output power reaches 1-kW in mid-IR. We present a concept of this laser system with emphasize on the front-end and the first regen. The holmium fiber front-end is pumped by a continuous wave 0.5-W thulium fiber laser generating at wavelength of 1950-nm. Mode-locking in the oscillator is reached by graphene multilayer optical element as a passive saturable absorber (GSA). The GSA provides broadband wavelength operation and is promising for MIR sources. In the laser setup, the GSA is placed in a free-space cavity as a part of ring laser configuration. This oscillator produces <10-ps-pulses with ~nJ energy and <40-MHz repetition rate. The repetition rate reduces acousto-optic modulator, pulses are pre-amplified in a chain containing Ho-doped fibers and a single crystal fiber to 10-uJ/10-to-100-kHz, and seeded to thin-disk regen. We expect demonstration of the front-end, detailed design of first regenerative amplifier and conceptual design of full system.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jitka Černohorská, Martin Smrž, Michael Písařík, Reza Amani, Michal Jelínek Jr., Pavel Peterka, Akira Endo, and Tomáš Mocek "Graphene-multilayer-saturable-absorber-based passively mode-locked Ho-doped fiber front-end for seeding of a 1-J/1-kW Ho:YAG cryogenically cooled thin-disk laser system (Conference Presentation)", Proc. SPIE 10511, Solid State Lasers XXVII: Technology and Devices, 1051108 (14 March 2018);


Fiber-based front ends for extreme light applications
Proceedings of SPIE (May 17 2018)
High energy ultra short pulse thin disk lasers new...
Proceedings of SPIE (March 16 2016)
100-J UV laser for dynamic compression research
Proceedings of SPIE (March 16 2016)
All fiber based amplification of 40 ps pulses from a...
Proceedings of SPIE (February 17 2011)
High energy short pulse fiber laser front end for kilo...
Proceedings of SPIE (February 23 2006)

Back to Top