Translator Disclaimer
Presentation + Paper
15 February 2018 Development of high power laser ablation process for polycrystalline diamond polishing: Part 1. Fundamental understanding of PCD ultra-short pulsed laser ablation
Author Affiliations +
Abstract
Diamond exhibits incredible chemical and mechanical properties. Utilization of diamond for industrial applications has universally spread thanks to the discovery of its industrial synthesis and the enhancement of its properties by its formation under a polycrystalline form, named polycrystalline diamond composite (PCD). For industrial production PCD bulk material has to pass through several complex processes from leaving the belt press down to be polished as a wafer with a mirror-finished surface. Especially the polishing process is an extremely laborious method originally discovered to polish diamond gemstones hundred years ago. Laser ablation has repeatedly been proven to be a cost efficient process for industrial purposes. Elaboration of new ablation processes for PCD manufacturing is increasing supported by the continuous improvement of ultra-short lasers and their high performances. The ambition of this project is to develop an alternative polishing process of PCD wafers by ultra-short laser ablation achieving better performances than traditional mechanical polishing. This paper presents a relationship between material related properties of various PCD grades and performance of ultra-short laser ablation process at low laser average power. Specifically, this paper demonstrates the high impact of the pulse duration on the ablation rate, the dependence of the optimal fluence for highest ablation rate on the PCD composition and the effect of fluence on diamond graphitization through Raman spectroscopy analysis.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
William Scalbert, David Tanner, Fathima Laffir, and Ronald Holtz "Development of high power laser ablation process for polycrystalline diamond polishing: Part 1. Fundamental understanding of PCD ultra-short pulsed laser ablation", Proc. SPIE 10525, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems VII, 105250N (15 February 2018); https://doi.org/10.1117/12.2290197
PROCEEDINGS
10 PAGES + PRESENTATION

SHARE
Advertisement
Advertisement
RELATED CONTENT

Laser polishing using ultrashort pulse laser
Proceedings of SPIE (March 02 2020)
Laser polishing of glass
Proceedings of SPIE (October 11 2015)
Water-jet-guided laser processing
Proceedings of SPIE (February 19 2003)

Back to Top