Paper
23 February 2018 Metalized monolithic high-contrast grating as a mirror for GaN-based VCSELs
Robert P. Sarzała, Adam K. Sokół, Łukasz Piskorski, Maciej Kuc, Patrycja Śpiewak, Magdalena Maciniak, Marcin Gębski, Michał Wasiak, Tomasz Czyszanowski
Author Affiliations +
Abstract
In this paper, we present a novel design of a nitride-based VCSEL emitting at 414 nm and perform numerical analysis of optical, electrical and thermal phenomena. The bottom mirror of the laser is a Al(In)N/GaN DBR (Distributed Bragg Reflector), whereas the top mirror is realized as a semiconductor-metal subwavelength-grating, etched in GaN with silver stripes deposited between the stripes of the semiconductor grating. In this monolithic structure simulations show a uniform active-region current density on the level of 5.5 kA/cm2 for the apertures as large as 10 μm. In the case of a broader apertures, e.g. 40 μm, we showed that, assuming a homogeneous current injection at the level of 5.5 kA/cm2 , the temperature inside the laser should not exceed 360 K, which gives promise to improve thermal management by uniformisation of the current injection.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Robert P. Sarzała, Adam K. Sokół, Łukasz Piskorski, Maciej Kuc, Patrycja Śpiewak, Magdalena Maciniak, Marcin Gębski, Michał Wasiak, and Tomasz Czyszanowski "Metalized monolithic high-contrast grating as a mirror for GaN-based VCSELs", Proc. SPIE 10532, Gallium Nitride Materials and Devices XIII, 105321B (23 February 2018); https://doi.org/10.1117/12.2289962
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Vertical cavity surface emitting lasers

Gallium nitride

Mirrors

Reflectivity

Refractive index

Continuous wave operation

Dielectrics

Back to Top