You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
9 May 2018Facet temperature reduction by separate pumped window in high power laser diodes
The main optical output power limitation in high power laser diodes is the catastrophic optical mirror damage (COMD) initiated by facet heating due to optical absorption, which limits the reliable power and lifetime of a single laser. Facet heating correlated with current injection near laser facets can be reduced by unpumped window structure. However, the high-power laser slope efficiency drops as the length of the window increases. In this work, separately pumped window (SPW) method is proposed and experimentally demonstrated to significantly reduce the facet temperature of the semiconductor lasers without compromising their performance. We used 5-mm long high-power laser diodes and compared its performance and facet temperature to the devices integrated with SPW facet sections, which are electrically isolated from the laser section. The slope efficiencies of the lasers with SPW and that of 5-mm lasers without SPW are comparable when SPW is pumped at its transparency current, illustrating that SPW integrated lasers preserve their slope efficiency. As the window pumping current increases, the threshold current of the laser with SPW decreases when the SPW approaches transparency. The facet temperature rise (ΔT) of the lasers were measured by the thermoreflectance method. The ΔT measured at waveguide regions of lasers was shown to be reduced by 42% implementing SPW region to conventional lasers. Therefore, SPW technique was shown to be a promising approach to increase the COMD level of the high-power laser diodes and it opens up a new avenue for reliable semiconductor laser operation at very high output power levels.
The alert did not successfully save. Please try again later.
Seval Arslan, Sinan Gündoğdu, Abdullah Demir, Atilla Aydınlı, "Facet temperature reduction by separate pumped window in high power laser diodes," Proc. SPIE 10682, Semiconductor Lasers and Laser Dynamics VIII, 106822B (9 May 2018); https://doi.org/10.1117/12.2311642