Formation flying metrology system for the ESA-PROBA3 mission: the Shadow Positioning Sensors (SPS)

D. Loreggia; S. Fineschi; A. Bemporad; M. Casti; V. Noce; G. Capobianco; G. Nicolini; L. Zangrilli; F. Landini; C. Baccani; M. Romoli; S. Buckley; C. Thizy; F. Denis; P. Ledent; B. Marquet; D. Galano; M. Belluso; L. Accatino; L. Terenzi; G. Morgante; M. Riva; M. Moschetti; C. Calderoni; S. Pieraccini

doi:10.1117/12.2314814

28 May 2018 Formation flying metrology system for the ESA-PROBA3 mission: the Shadow Positioning Sensors (SPS)

D. Loreggia, S. Fineschi, A. Bemporad, M. Casti, V. Noce, G. Capobianco, G. Nicolini, L. Zangrilli, F. Landini, C. Baccani, M. Romoli, S. Buckley, C. Thizy, F. Denis, P. Ledent, B. Marquet, D. Galano, M. Belluso, L. Accatino, L. Terenzi, G. Morgante, M. Riva, M. Moschetti, C. Calderoni, S. Pieraccini

Author Affiliations +

Proceedings Volume 10695, Optical Instrument Science, Technology, and Applications; 1069503 (2018) https://doi.org/10.1117/12.2314814
Event: SPIE Optical Systems Design, 2018, Frankfurt, Germany

Abstract

PROBA3 is the first high precision formation flying (FF) mission under responsibility of the European Space Agency (ESA). It is a technology mission devoted to in-orbit demonstration of the FF techniques, with two satellites kept at an average inter-satellite distance of 144m. The guiding scientific rationale is to realize a diluted coronagraph with the telescope (ASPIICS) on one satellite and the external occulter on the other satellite to observe the inner Solar corona at high spatial and temporal resolution, down to 1.08R⊙. The two spacecraft will be orbiting in a high eccentricity geocentric trajectory with perigee at 600km and the apogee at 60000Km and with an orbital period of 19hrs. The FF acquisition and operations will last about 6 hrs around the apogee and different metrology systems will be used for realizing and controlling the FF. The alignment active most critical sub-system is the Shadow Positioning Sensors (SPS), a series of Si-PM (Silicon Photomultiplier) disposed around the ASPIICS telescope's entrance aperture and measuring the proper positioning of the penumbra generated by the occulter at the center of the coronagraph’s optical reference frame. The FF alignment measurement accuracies required to the SPS are: 500μm for lateral movements and 50mm for longitudinal movements. This paper gives an overview of the opto-mechanical and electronic design and of the software algorithm for the FF intersatellite positioning. The expected performance of the SPS metrology system are reported.

Citation Download Citation

D. Loreggia, S. Fineschi, A. Bemporad, M. Casti, V. Noce, G. Capobianco, G. Nicolini, L. Zangrilli, F. Landini, C. Baccani, M. Romoli, S. Buckley, C. Thizy, F. Denis, P. Ledent, B. Marquet, D. Galano, M. Belluso, L. Accatino, L. Terenzi, G. Morgante, M. Riva, M. Moschetti, C. Calderoni, and S. Pieraccini "Formation flying metrology system for the ESA-PROBA3 mission: the Shadow Positioning Sensors (SPS)", Proc. SPIE 10695, Optical Instrument Science, Technology, and Applications, 1069503 (28 May 2018); https://doi.org/10.1117/12.2314814

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available