Translator Disclaimer
Paper
21 August 2018 Automatized alignment of the focal plane assemblies on the PLATO cameras
Author Affiliations +
Abstract
PLATO (PLAnetary Transits and Oscillation of stars) is a medium-class space mission part of the ESA Cosmic vision program. Its goal is to find and study extrasolar planetary systems, emphasizing on planets located in habitable zone around solar-like stars. PLATO is equipped with 26 cameras, operating between 500 and 1000nm. The alignment of the focal plane assembly (FPA) with the optical assembly is a time consuming process, to be performed for each of the 26 cameras. An automatized method has been developed to fasten this process. The principle of the alignment is to illuminate the camera with a collimated beam and to vary the position of the FPA to search for the position which minimizes the RMS spot diameter. To reduce the total number of measurements which is performed, the alignment method is done by iteratively searching for the best focus, decreasing at each step the error on the estimated best focus by a factor 2. Because the spot size at focus is similar to the pixel, it would not be possible with this process alone to reach an alignment accuracy of less than several tens of microns. Dithering, achieved by in-plane translation of the focal plane and image recombination, is thus used to increase the sampling of the spot and decrease the error on the merit function.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
L. Clermont, J. Jacobs, P. Blain, M. Abreu, B. Vandenbussche, P. Royer, R. Huygen, J. P. Halain, and A. Baeke "Automatized alignment of the focal plane assemblies on the PLATO cameras ", Proc. SPIE 10698, Space Telescopes and Instrumentation 2018: Optical, Infrared, and Millimeter Wave, 106986L (21 August 2018); https://doi.org/10.1117/12.2314167
PROCEEDINGS
12 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT


Back to Top