Thermal reliability testing of digital micromirror devices (DMDs)

Gavin N. Hope; Devin Conley; Aidan C. Gray; Stephen C. Hope; Robert Barkhouser; Stephen A. Smee; Massimo Robberto

doi:10.1117/12.2314324

10 July 2018 Thermal reliability testing of digital micromirror devices (DMDs)

Gavin N. Hope, Devin Conley, Aidan C. Gray, Stephen C. Hope, Robert Barkhouser, Stephen A. Smee, Massimo Robberto

Proceedings Volume 10706, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation III; 107063T (2018) https://doi.org/10.1117/12.2314324
Event: SPIE Astronomical Telescopes + Instrumentation, 2018, Austin, Texas, United States

Abstract

Digital micromirror devices (DMDs) have the potential to revolutionize near infrared spectroscopy of crowded fields in astronomy. These devices, however, are not designed to operate at cryogenic temperatures as necessary for the infrared bandpass. The purpose of this study is to evaluate the viability of DMDs for use in infrared applications by testing the devices at cryogenic temperatures. In total, eleven DMDs were tested, each being cooled in a cryo-vacuum chamber to cryogenic temperature; approximately 90 K. Each device endured three cooldown and warmup cycles on average. Units tested include six stock, unaltered, DMDs from Texas Instruments™, as well as five re-windowed devices. Results indicate that stock devices function reliably at cryogenic temperature, however window-replaced devices had a high failure rate; likely due to contamination in the window-replacement process. Based on these results, it appears that stock devices perform reliably enough at cryogenic temperatures for reliable use in an instrument, but more research is needed into the re-windowing process before re-windowed devices are used within spectrographs.

Citation Download Citation

Gavin N. Hope, Devin Conley, Aidan C. Gray, Stephen C. Hope, Robert Barkhouser, Stephen A. Smee, and Massimo Robberto "Thermal reliability testing of digital micromirror devices (DMDs)", Proc. SPIE 10706, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation III, 107063T (10 July 2018); https://doi.org/10.1117/12.2314324

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available