Translator Disclaimer
Paper
10 July 2018 Photogrammetry-based metrology of fiber positioner in LAMOST
Author Affiliations +
Abstract
Measuring the position of the end of 4000 optical fibers on the spherical focal plate for the LAMOST (Large Sky Area Multi-Object Fiber Spectroscopy Telescope) optical fibers positioning system is one of the key problems for LAMOST. The accuracy of optical fibers positioning system is guaranteed by feedback from measuring the position of the end of optical fiber. The position of the end of optical fiber is measured by photogrammetry with precision calibration. However, given the complexities in the optical fiber focal plane and the fiber positioner, the accurate standard point is considerably difficult to obtain, which results in insufficient calibration accuracy. To solve this problem, a convenient calibration method based on the Flexible Planar Target (FPT) is proposed. In this method, each fiber positioning unit positions the fiber to 16 designed locations, which are relatively accurate. These points form a high-precision 2D point array that can be used as the planar target. In this manner, each fiber positioning unit can be regarded as a small high-precision planar target. All small high-precision planar targets are assembled to form the Flexible Planar Target (FPT), which is used for calibration. Experimental results indicate that this improved method can reach a higher precision than that of previous method.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lianpo Wang, Ye Zhu, Yonggang Gu, Chao Zhai, Hongzhuan Hu, and Zhigang Liu "Photogrammetry-based metrology of fiber positioner in LAMOST", Proc. SPIE 10706, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation III, 107064D (10 July 2018); https://doi.org/10.1117/12.2311948
PROCEEDINGS
8 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT


Back to Top