You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
9 October 2018Mitigation of crosstalk effects in multi-LiDAR configurations
In this paper, we examine crosstalk effects that can arise in multi-LiDAR configurations, and we show a data-based approach to mitigate these effects. Due to the ability to acquire precise 3D data of the environment, LiDAR-based sensor systems (sensors based on “Light Detection and Ranging”, e.g., laser scanners) increasingly find their way into various applications, e.g. in the automotive sector. However, with an increasing number of LiDAR sensors operating within close vicinity, the problem of potential crosstalk between these devices arises. “Crosstalk” outlines the following effect: In a typical LiDAR-based sensor, short laser pulses are emitted into the scene and the distance between sensor and object is derived from the time measured until an “echo” is received. In case multiple laser pulses of the same wavelength are emitted at the same time, the detector may not be able to distinguish between correct and false matches of laser pulses and echoes, resulting in erroneous range measurements and 3D points. During operation of our own multi-LiDAR sensor system, we were able to observe crosstalk effects in the acquired data. Having compared different spatial filtering approaches for the elimination of erroneous points in the 3D data, we propose a data-based spatio-temporal filtering and show its results, which may be sufficient depending on the application. However, technical solutions are desired for future LiDAR sensors.
The alert did not successfully save. Please try again later.
Axel L. Diehm, Marcus Hammer, Marcus Hebel, Michael Arens, "Mitigation of crosstalk effects in multi-LiDAR configurations," Proc. SPIE 10796, Electro-Optical Remote Sensing XII, 1079604 (9 October 2018); https://doi.org/10.1117/12.2324305