Translator Disclaimer
Presentation
12 October 2018 Pattern formation mechanism of zirconia nanoparticle resist used for extreme-ultraviolet lithography (Conference Presentation)
Author Affiliations +
Abstract
The performance of chemically amplified resist is approaching its physical limit with the reduction of feature sizes due to the acid diffusion needed for the solubility change of resist polymer. The line edge roughness (LER) of chemically amplified resists rapidly increases in the sub-10-nm-half-pitch region when the half-pitch is decreased. Also, the stochastic defect (pinching and bridges) generation is a significant concern for the high resolution patterning with high throughput. To solve these problems, the increase of the density of resist films is an important strategy. Metal oxide nanoparticle resists have attracted much attention as the next generation resist used for the high-volume production of semiconductor devices because of their high density property. However, the sensitization mechanism of the metal oxide nanoparticle resists is unknown. Understanding the sensitization mechanism is important for the efficient development of resist materials. In the previous study[1], the numbers of electron-hole pairs required for the solubility change of the resist films were estimated for a zirconia nanoparticle and a ligand shell, respectively. In this study, the pattern formation mechanism of zirconia nanoparticle resist was investigated. The elementary reactions possibly induced in the zirconia nanoparticle resist were investigated using a pulse radiolysis method. The pulse radiolysis is a powerful method to directly observe the kinetics of short-lived intermediates produced by an ionizing radiation. The pattern formation mechanism was assumed by integrating the elementary reactions. The resist patterns fabricated using an EUV exposure tool were analyzed on the basis of the assumed pattern formation mechanism. In the material design of metal oxide nanoparticle resists, it is important to efficiently use the electron-hole pairs generated in nanoparticles for the chemical change of ligand molecules. Acknowledgement This work was partially supported by Ministry of Economy, Trade and Industry (METI) and the New Energy and Industrial Technology Development Organization (NEDO). Reference [1] T. Kozawa, J. J. Santillan, and T. Itani, “Electron–hole pairs generated in ZrO2 nanoparticle resist upon exposure to extreme ultraviolet radiation”, Jpn. J. Appl. Phys. 57, 026501 (2018).
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Takahiro Kozawa, Teppei Yamada, Satoshi Ishihara, Hiroki Yamamoto, Yusa Muroya, Julius J. S. Santillan, and Toshiro Itani "Pattern formation mechanism of zirconia nanoparticle resist used for extreme-ultraviolet lithography (Conference Presentation)", Proc. SPIE 10809, International Conference on Extreme Ultraviolet Lithography 2018, 108090I (12 October 2018); https://doi.org/10.1117/12.2501647
PROCEEDINGS
PRESENTATION


SHARE
Advertisement
Advertisement
Back to Top