Analysis and discussion on processing and adjusting technology of infrared optical system

Ying Su; Xiaozhou Zuo; Haicheng Yang; Wenting Li; Zengqi Xu; Sen Zhang; Rui Guo; Hongjun Zhao; Feng Zhang; Yu Zhang; Xuanmin Liu

doi:10.1117/12.2505624

Translator Disclaimer

16 January 2019 Analysis and discussion on processing and adjusting technology of infrared optical system

Ying Su, Xiaozhou Zuo, Haicheng Yang, Wenting Li, Zengqi Xu, Sen Zhang, Rui Guo, Hongjun Zhao, Feng Zhang, Yu Zhang, Xuanmin Liu

Author Affiliations +

Proceedings Volume 10838, 9th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 1083816 (2019) https://doi.org/10.1117/12.2505624
Event: Ninth International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT2018), 2018, Chengdu, China

Abstract

Aiming at the processing of infrared optical parts and the adjustment of infrared optical system, key links, such as surface shape change, optical axis deviation, etc and influencing factors were analyzed in detail caused by internal defects and stress of Infrared optical parts, differences in material properties and adjusting tightening force from the aspects of optical processing and opto-mechanical adjustment, whose influence on the final performance and quality of the infrared system was pointed out. On this basis, the problems existing in the current manufacturing process of the infrared optical system were sorted out, and the related technology which was needed to be carried out and the content of continuous attention were put forward to realize the refinement and parameterization of infrared system process control, and improve the manufacturing performance and quality of infrared optical system.

Citation Download Citation

Ying Su, Xiaozhou Zuo, Haicheng Yang, Wenting Li, Zengqi Xu, Sen Zhang, Rui Guo, Hongjun Zhao, Feng Zhang, Yu Zhang, and Xuanmin Liu "Analysis and discussion on processing and adjusting technology of infrared optical system", Proc. SPIE 10838, 9th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 1083816 (16 January 2019); https://doi.org/10.1117/12.2505624

ACCESS THE FULL ARTICLE