Large area distributed strain monitoring using patterned nanocomposite sensing meshes

Gianmarco Vella; Sumit Gupta; Kenneth J. Loh; Anton Netchaev

doi:10.1117/12.2514112

27 March 2019 Large area distributed strain monitoring using patterned nanocomposite sensing meshes

Gianmarco Vella, Sumit Gupta, Kenneth J. Loh, Anton Netchaev

Proceedings Volume 10970, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2019; 109702E (2019) https://doi.org/10.1117/12.2514112
Event: SPIE Smart Structures + Nondestructive Evaluation, 2019, Denver, Colorado, United States

Abstract

The ability to measure, monitor, and prevent catastrophic failure has made structural health monitoring crucial for aerospace, civil, and marine structures. Spatial strain sensing is necessary for quantifying distributed damage in structural systems. Previous studied that coupled electrical impedance tomography (EIT) algorithms with piezoresistive coatings opened up vast opportunities for distributed strain sensing. However, these approaches could not extract strain directionalities from the reconstructed EIT conductivity maps, and sensing resolution remained rather low. Therefore, this study aims to develop next-generation “sensing meshes” capable of resolving both spatial strain magnitudes and directionalities for distributed strain field monitoring. The approach is to design and fabricate piezoresistive graphenebased thin films and then patterning them to form a grid or mesh. The nanocomposite grid lines were designed to be of a high-aspect ratio so that each grid element could sense distributed strain along its length and direction. Various sensing mesh specimens were fabricated, and a load frame was employed to strain them in a controlled manner. Similar to conventional EIT, boundary voltage measurements were acquired when electrical current was applied between two boundary electrodes. The boundary voltage dataset was then used as inputs to the EIT inverse algorithm to reconstruct the conductivity distribution of the sensing mesh. For verification, these experimental results were compared to an elastic finite element model subjected to the same strain states. Good agreement between the experimental tests and numerical simulations were observed, thereby demonstrating the potential of this technology for distributed strain field monitoring.

Citation Download Citation

Gianmarco Vella, Sumit Gupta, Kenneth J. Loh, and Anton Netchaev "Large area distributed strain monitoring using patterned nanocomposite sensing meshes", Proc. SPIE 10970, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2019, 109702E (27 March 2019); https://doi.org/10.1117/12.2514112

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
12 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Thin films

Electrodes

Finite element methods

Nanocomposites

Resistance

Sensors

Numerical simulations

Show All Keywords

Keywords/Phrases

Search In:

Publication Years