Paper
27 March 2019 Detecting underground metallic objects of different sizes using synthetic aperture radar
Author Affiliations +
Abstract
Detecting underground/subsurface metallic objects such as landmines and IEDs (improvised explosive devices) using efficient and effective inspection techniques is crucial in demining and mine clearance missions. The use of microwave/radar sensors in remote sensing represents a new approach to reduce demining risks and to improve efficiency. To achieve the goal, electromagnetic signatures of underground metallic objects must be thoroughly studied. The objective of this paper is to use synthetic aperture radar (SAR) imaging to investigate the size effect of an underground metallic object buried in SAR images at three ranges (15 cm, 30 cm, and 60 cm). Three different sizes (diameters = 7.6 cm, 15.2 cm, and 20.3 cm) were used and buried inside a container (sandbox) filled up with dry sand. A 10-GHz SAR imaging radar sensor was applied to generate all SAR images inside an anechoic chamber. It was found that SAR amplitude decreases with the increase of radar range. In addition, reconstructed distribution of SAR amplitudes depended on the size of underground steel disk specimens. SAR amplitudes (maximum and integrated) were related to the range and modeled by empirical equations.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ahmed Alzeyadi, Jie Hu, and Tzuyang Yu "Detecting underground metallic objects of different sizes using synthetic aperture radar", Proc. SPIE 10970, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2019, 109702W (27 March 2019); https://doi.org/10.1117/12.2514480
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Synthetic aperture radar

Radar

Land mines

Signal to noise ratio

Imaging systems

Sensors

Radar imaging

Back to Top