Paper
15 March 2019 Influence of annealing on nanocrystalline LiNbO3 films properties
Viktor S. Klimin, Zakhar E. Vakulov, Roman V. Tominov, Yuriy N. Varzarev, Iosif E. Clemente, Andrew V. Miakonkikh, Konstantin V. Rudenko, Oleg A. Ageev
Author Affiliations +
Proceedings Volume 11022, International Conference on Micro- and Nano-Electronics 2018; 110221E (2019) https://doi.org/10.1117/12.2522316
Event: The International Conference on Micro- and Nano-Electronics 2018, 2018, Zvenigorod, Russian Federation
Abstract
This work shows the results of studies on the effect of annealing on the properties of nanocrystalline LiNbO3 films. Unannealed LiNbO3 films are characterized by the formation of triangular grains and large droplets on the film surface. It has been shown that annealing in an oxygen atmosphere leads to significantly reducing the surface roughness of the films (from 63 to 47 nm) and the density of droplets on the LiNbO3 film surface. It was established that annealing within 1 hour in oxygen atmosphere under temperature of 600°C allows increasing oxygen content in the film from 4.03 atm. % up to 11.02 atm. %. Using annealing made it possible to reduce the maximum value of absorption rate from 1.11 to 0.29. Obtained results can be used under development of energy converters and acousto-optic devices for use in electronics and medicine.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Viktor S. Klimin, Zakhar E. Vakulov, Roman V. Tominov, Yuriy N. Varzarev, Iosif E. Clemente, Andrew V. Miakonkikh, Konstantin V. Rudenko, and Oleg A. Ageev "Influence of annealing on nanocrystalline LiNbO3 films properties", Proc. SPIE 11022, International Conference on Micro- and Nano-Electronics 2018, 110221E (15 March 2019); https://doi.org/10.1117/12.2522316
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Annealing

Oxygen

Scanning electron microscopy

Surface roughness

Absorption

Atmospheric modeling

Atmospheric optics

Back to Top