Phase correction method for dynamic 3D measurement based on fringe projection

Xingcan Zhou; Yong Li; Kai Huang; Yiteng Jiang

doi:10.1117/12.2537678

18 November 2019 Phase correction method for dynamic 3D measurement based on fringe projection

Xingcan Zhou, Yong Li, Kai Huang, Yiteng Jiang

Proceedings Volume 11189, Optical Metrology and Inspection for Industrial Applications VI; 111891I (2019) https://doi.org/10.1117/12.2537678
Event: SPIE/COS Photonics Asia, 2019, Hangzhou, China

Abstract

An additional phase shift is produced when the 3D shape of dynamic scene is measured by phase shifting method. The phase distribution measured by traditional method is distorted and the recovered 3D shape is distorted as well. The Gerchberg iteration algorithm and the windowed Fourier assisted phase shifting method were proposed to reduce the distortion. The main ideal of these methods is to accurately estimate the phase shift between two fringe patterns. The accuracy of phase shift estimation is low near the edge where the frequency of fringe changes suddenly. We proposed a method to increase the accuracy of phase shift estimation. The edge of frequency sudden change is found out and then the fringe pattern is divided into different regions. The Gerchberg iteration algorithm is adopted to extend the fringe to outside of every region. The windowed Fourier analysis is adopted to estimate phase of every region and then the phase distribution of whole pattern is obtained. The phase shift between two fringe patterns is obtained by subtracting the estimated phase of first pattern from that of second pattern. Finally, the accurate phase distribution is obtained from the fringe patterns and the estimated phase shifts by least square method. The comparative experiments were carried out to evaluate the proposed method. The experimental results show that the accuracy of measured phase by proposed method is higher than that by windowed Fourier assisted phase shifting method.

Citation Download Citation

Xingcan Zhou, Yong Li, Kai Huang, and Yiteng Jiang "Phase correction method for dynamic 3D measurement based on fringe projection", Proc. SPIE 11189, Optical Metrology and Inspection for Industrial Applications VI, 111891I (18 November 2019); https://doi.org/10.1117/12.2537678

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available