Paper
3 January 2020 Fiber modal noise mitigation by a rotating double scrambler
Author Affiliations +
Abstract
Fiber modal noise is a performance limiting factor in high-precision radial velocity measurements with multi-mode fiber fed high-resolution spectrographs. Traditionally, modal noise is mitigated by agitating the fiber, this way redistributing the light that propagates in the fiber over many different modes. However, in case of fibers with only a limited number of modes, e.g. at near-infrared wavelengths or in adaptive-optics assisted systems, this method becomes very inefficient. The strong agitation that would be needed stresses the fiber and can lead to focal ratio degradation. As an alternative approach, we propose to use a classic optical double scrambler and to rotate the scrambler’s first fiber end during each exposure. Because of the rotating illumination pattern of the scrambler’s second fiber, the modes that are excited vary continuously. This leads to very efficient averaging of the modal pattern at the fiber exit and to a strong reduction of modal noise. In this contribution, we present a prototype design and first laboratory results of the rotating double scrambler.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
G. Raskin, D. Rogozin, T. Mladenov, C. Schwab, and D. Coutts "Fiber modal noise mitigation by a rotating double scrambler", Proc. SPIE 11203, Advances in Optical Astronomical Instrumentation 2019, 112031O (3 January 2020); https://doi.org/10.1117/12.2541364
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Spectrographs

Speckle pattern

Astronomy

Lenses

Multimode fibers

Optical fibers

Signal to noise ratio

Back to Top