Paper
21 February 2020 Simulation and experimental results of a microfluidic dipole designed for brain experiments
Author Affiliations +
Abstract
This paper describes a proof of concept of a microfluidic dipole to sample cerebral fluid. It consists of a portable microfluidic probe which injects a buffer in one inlet and draws it from the other one after passing through a contact zone with the external liquid. Finite elements method modelling (FEM) shows a very stable liquid flow across the complete probing area. Furthermore, we determined that a design generating turbulence is likely to be more useful to capture brain molecules. Molecules displacement due to diffusion phenomena takes about 25 ms to diffuse over a 1 mm probe gap. Finally, our experiment showed that, to obtain a stable flow without turbulence the maximum inlet and outlet pressure is 0.05 mPa for the two tested configuration of dipole.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Nathaniel Brochu, Hamza Landari, Younes Messaddeq, and Amine Miled "Simulation and experimental results of a microfluidic dipole designed for brain experiments", Proc. SPIE 11235, Microfluidics, BioMEMS, and Medical Microsystems XVIII, 112350C (21 February 2020); https://doi.org/10.1117/12.2547267
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Microfluidics

Brain

Liquids

Finite element methods

Actuators

RELATED CONTENT

High-pressure microfluidics
Proceedings of SPIE (March 05 2015)
Dielectric elastomer pump for artificial organisms
Proceedings of SPIE (March 28 2011)
Microelectrofluidic lens for variable curvature
Proceedings of SPIE (October 11 2012)
Development of micro pump for bio MEMS by using new...
Proceedings of SPIE (April 18 2011)

Back to Top