The sensitivity of the mode instability threshold to different types of intensity noise

Christoph Stihler; Cesar Jauregui; Sobhy E. Kholaif; Jens Limpert

doi:10.1117/12.2543529

21 February 2020 The sensitivity of the mode instability threshold to different types of intensity noise

Christoph Stihler, Cesar Jauregui, Sobhy E. Kholaif, Jens Limpert

Proceedings Volume 11260, Fiber Lasers XVII: Technology and Systems; 1126018 (2020) https://doi.org/10.1117/12.2543529
Event: SPIE LASE, 2020, San Francisco, California, United States

Abstract

In this work we experimentally and theoretically investigate the impact of seed intensity-noise on the threshold of transverse mode instability (TMI) in Yb-doped, high-power fiber laser systems and compare it to the impact of pump intensity-noise. Former studies have shown that pump intensity-noise significantly decreases the TMI threshold due to the introduction of a phase shift between the modal interference pattern and the thermallyinduced refractive index grating in the fiber. However, it can be expected that fluctuations of the seed power will also induce such phase shifts due to a change of the extracted energy and the heat load in the fiber. Thus, it is important to investigate which one, i.e. the seed- or the pump intensity-noise, has a severer impact on the TMI threshold. Our experiments have shown that the TMI threshold of a fiber amplifier was decreased by increasing the seednoise amplitude. However, contrary to conventional belief, the impact of seed intensity-noise was much weaker than the one of pump intensity-noise. The measurements are in good agreement with our simulations and can be well explained with previous studies about the noise transfer function. The reason for the weaker impact of seed intensity-noise on the TMI threshold is the attenuation of its frequency components below 20 kHz in saturated fiber amplifiers, which includes the frequencies relevant for TMI. Thus, the main trigger for TMI in saturated fiber amplifiers can be considered to be pump intensity-noise. A suppression of this noise below 20 kHz represents a promising way to increase the TMI threshold of fiber laser systems.

Citation Download Citation

Christoph Stihler, Cesar Jauregui, Sobhy E. Kholaif, and Jens Limpert "The sensitivity of the mode instability threshold to different types of intensity noise", Proc. SPIE 11260, Fiber Lasers XVII: Technology and Systems, 1126018 (21 February 2020); https://doi.org/10.1117/12.2543529

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available