High dynamic-range observation using a 1.8-m off-axis telescope PLANETS: feasibility study and telescope design

Masato Kagitani; Takeshi Sakanoi; Yasumasa Kasaba; Yasuhiro Hirahara; Mikio Kurita; Jeffrey R. Kuhn; Svetlana V. Berdyugina; Marcelo Emilio

doi:10.1117/12.2556458

13 December 2020 High dynamic-range observation using a 1.8-m off-axis telescope PLANETS: feasibility study and telescope design

Masato Kagitani, Takeshi Sakanoi, Yasumasa Kasaba, Yasuhiro Hirahara, Mikio Kurita, Jeffrey R. Kuhn, Svetlana V. Berdyugina, Marcelo Emilio

Author Affiliations +

Proceedings Volume 11445, Ground-based and Airborne Telescopes VIII; 1144543 (2020) https://doi.org/10.1117/12.2556458
Event: SPIE Astronomical Telescopes + Instrumentation, 2020, Online Only

Conference Poster

Abstract

PLANETS will be a 1.8-m off-axis telescope combined with contrast enhancement techniques, enabling us to observe faint emissions in the vicinity of bright objects. This “high dynamic-range” capability is largely dependent upon precision of telescope optics as well as atmospheric distortion. We present feasibility study of monitoring water plumes on Europa, neutral torus close to Enceladus, and ionosphere on Mars using PLANETS telescope. To test feasibility of high dynamic-range observation under actual conditions of wavefront error, we modeled propagation of light though the system based on Fraunhofer calculation taking into account for wavefront error made by atmospheric distortion and by primary mirror figure error. Then point spread function is calculated for several cases of figure errors under use of adaptive optics. The modeling result predicts that the moderate or high-precision primary mirror is mandatory to accomplish the high dynamic-range observation. We also present the latest design of PLANETS, especially focus on the support structures of primary mirror. We employ 36-point whiffletrees with 33 warping harnesses for axial support, and 24-point Schwesinger support for lateral support. The active support system is expected to reduce pre-polished RMS error from 1.51 μm to 0.66 μm corresponding to 70% reduction in total volume of final polish. The laboratory experiment using one third part of prototype whiffletrees shows supporting force RMS repeatability < 0.005 kgf, and drive hysteresis < 0.7% of load range, which are precise enough to control or to keep the primary mirror figure.

Conference Presentation

Citation Download Citation

Masato Kagitani, Takeshi Sakanoi, Yasumasa Kasaba, Yasuhiro Hirahara, Mikio Kurita, Jeffrey R. Kuhn, Svetlana V. Berdyugina, and Marcelo Emilio "High dynamic-range observation using a 1.8-m off-axis telescope PLANETS: feasibility study and telescope design", Proc. SPIE 11445, Ground-based and Airborne Telescopes VIII, 1144543 (13 December 2020); https://doi.org/10.1117/12.2556458

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available