Paper
8 July 2020 Micro lens arrays made by CO2-laser radiation
Author Affiliations +
Proceedings Volume 11478, Seventh European Seminar on Precision Optics Manufacturing; 1147806 (2020) https://doi.org/10.1117/12.2566485
Event: Seventh European Seminar on Precision Optics Manufacturing, 2020, Teisnach, Germany
Abstract
In this article a new way of fabricating micro-optics, especially micro lens arrays (MLA’s) with lens heights up to several hundreds of micrometers is shown. Existing methods of MLA fabrication are compared to the new approach. Also applications are presented. A novel short pulse CO2-laser system is used for the production, which allows pulse lengths down to 200 ns. In combination with a common galvo-scanner system, the micro lenses are preformed by an ablation process in tens of seconds. Here, different lens diameters, lens radii and array sizes can be produced. In a second step, the MLA is fire-polished with the same laser source. For this process step the laser is switched to cw-mode. The preformed lenses melt and get a defined radius as a result of the surface tension of the molten glass. Measurements of the resulting geometry are be presented. As the results show, the laser based micro lens array fabrication process has a high reproducibility, very high flexibility, short process times and can process different glasses like borosilicate, soda lime or fused silica.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Thomas Schmidt and Daniel Conrad "Micro lens arrays made by CO2-laser radiation", Proc. SPIE 11478, Seventh European Seminar on Precision Optics Manufacturing, 1147806 (8 July 2020); https://doi.org/10.1117/12.2566485
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Glasses

Polishing

Surface finishing

Laser ablation

Sensors

Cameras

Carbon dioxide lasers

RELATED CONTENT

Closed-loop next generation laser polishing
Proceedings of SPIE (August 07 2018)
Laser polishing of glass
Proceedings of SPIE (October 11 2015)
Laser application for optical glass polishing
Proceedings of SPIE (August 19 1996)
Study of CO2 laser smoothing of surface roughness in fused...
Proceedings of SPIE (December 31 2009)

Back to Top