Translator Disclaimer
Poster + Paper
20 August 2020 Measurement of retardance variations over the apertures of liquid-crystal variable retarders
Author Affiliations +
Conference Poster
Abstract
Variations of the induced retardance in the aperture of liquid-crystal variable retarders LCVR and spatial light modulators LC-SLM are measured. It is found that the induced retardance, in LCVR, shows variations over the aperture which depend on the wavelength of the light used and the voltage applied. Larger retardance variations appear near to the edges of the cell. There are also larger variations in the maximum and minimum unwrapped retardances in the retardance versus voltage curves. These voltage values and the edges positions of the cells should be avoided in applications of these devices. On the other hand, the induced retardance is calculated pixel by pixel in LC-SLM. For the same gray level over the entire LC-SLM screen, there are differences in the induced retardance between pixels located in a central area and pixels located in the edges. For correct calibration of the LC-SLM, the retardance value as a function of gray level was determined, pixel by pixel.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Claudio N. Ramirez, Neil C. Bruce, Juan M. Lopez-Tellez, Oscar G. Rodriguez-Herrera, and Martha Rosete-Aguilar "Measurement of retardance variations over the apertures of liquid-crystal variable retarders", Proc. SPIE 11487, Optical Manufacturing and Testing XIII, 114871O (20 August 2020); https://doi.org/10.1117/12.2568645
PROCEEDINGS
12 PAGES + POSTER

SHARE
Advertisement
Advertisement
Back to Top