Design and realization of an industrial stand-alone EUV resist qualification setup

B. Lüttgenau; S. Brose; S. Choi; D. Panitzek; S. Danylyuk; R. Lebert; J. Stollenwerk; P. Loosen

doi:10.1117/12.2572803

13 October 2020 Design and realization of an industrial stand-alone EUV resist qualification setup

B. Lüttgenau, S. Brose, S. Choi, D. Panitzek, S. Danylyuk, R. Lebert, J. Stollenwerk, P. Loosen

Author Affiliations +

Proceedings Volume 11517, Extreme Ultraviolet Lithography 2020; 115171F (2020) https://doi.org/10.1117/12.2572803
Event: SPIE Photomask Technology + EUV Lithography, 2020, Online Only

Conference Poster

Abstract

The EUV laboratory exposure tool (EUV-LET) is a compact nanostructuring setup used for large-area patterning of arbitrary to periodic structures as well as industrial photoresist characterization in terms of sensitivity, contrast and resolution. The setup utilizes partially coherent radiation of a compact discharge-produced plasma (DPP) EUV source, spectrally filtered by a multilayer mirror to a wavelength of 13.5 nm with 4 % bandwidth (full width at half maximum, FWHM). The system is equipped with a precise positioning system for mask and wafer, which allows resist exposures at defined distances. For the generation of large area nanopatterns, the achromatic Talbot lithography is applied which is well suited for high-resolution patterning of periodic structures with partially coherent radiation from plasma-based EUV sources. Optimized transmission masks enable the generation of contrast rich intensity modulations leading to structure sizes below 40 nm. The theoretical resolution limit is in the sub-10 nm range by taking advantage of a two times mask pattern demagnification. The achievable practical resolution is mainly limited by the fabrication of the required transmission masks and the optical properties of the mask illumination. In this contribution, the EUV-LET serves as a basis to identify design rules for core building blocks of a future industrial EUV resist qualification setup (EUV-REQS). These core building blocks try to overcome the main limitations to resist testing at highest resolution as stated above. For the optimization of the illumination properties, the design of highly efficient illumination optics is investigated and presented. Aims of the illumination optics are the generation of high throughput, homogeneous illumination of the patterned mask area and the optimization of the EUV radiation properties to fulfill the requirements for Talbot lithography. For the generation of high-resolution intensity patterns in wafer plane, the design of resolution test masks is analyzed and evaluated by means of the achievable resolution and patterning uniformity. The fabrication of a resolution test mask and selected exposure results are shown as well.

Citation Download Citation

B. Lüttgenau, S. Brose, S. Choi, D. Panitzek, S. Danylyuk, R. Lebert, J. Stollenwerk, and P. Loosen "Design and realization of an industrial stand-alone EUV resist qualification setup", Proc. SPIE 11517, Extreme Ultraviolet Lithography 2020, 115171F (13 October 2020); https://doi.org/10.1117/12.2572803

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE