Presentation + Paper
20 September 2020 Millimetre-wave beam steering with analog-resolution and minimised distortion based on liquid crystals tunable delay lines with enhanced signal-to-noise ratios
Author Affiliations +
Abstract
Millimetre-wave beam-steering distortions are due mainly to unbalanced feeding amplitudes among the delay lines network. To compensate for this, active amplifiers or attenuators are employed, increasing the circuit complexity and costs, whilst compromising the passive array advantage. This work presents a passive millimetre-wave distortion-free beam steering solution with analog resolution in liquid crystal planar delay line technology. Enclosed coplanar waveguide (ECPW) tunable delay lines with 0-180˚ and 0-360˚ phase-shifting ranges are prototyped respectively. A novel impedance matching and mismatching approach for amplitude compensation is proposed and verified, as evidenced by the 67 GHz measured maximum insertion loss of –4.37 dB (variation up to 5%) for the 0-180˚ delay line, and –8.28 dB (variation up to 8%) for the 0-360˚ device. Based on a smart combination of the 0-180˚ and 0-360˚ ECPW, an optimised delay lines deployment scheme is proposed for two-dimensional beam steering with a fault tolerance capability and a minimised systematic insertion loss in total on the feeding network.
Conference Presentation
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jinfeng Li "Millimetre-wave beam steering with analog-resolution and minimised distortion based on liquid crystals tunable delay lines with enhanced signal-to-noise ratios", Proc. SPIE 11541, Millimetre Wave and Terahertz Sensors and Technology XIII, 115410H (20 September 2020); https://doi.org/10.1117/12.2570001
Lens.org Logo
CITATIONS
Cited by 12 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Beam steering

Phase shifts

Liquid crystals

Distortion

Absorption

Dielectrics

Signal attenuation

Back to Top