Presentation + Paper
10 October 2020 First optical design for wide angle micro LED without second lens
Author Affiliations +
Abstract
This study proposed 1st optical design for wide angle micro LED without 2nd lens. Micro LEDs are point light sources that the beam angle of 120°, therefore, a large number of LEDs are needed to achieve a uniform area light source. We used 1st optical design to modulate luminous intensity curve, in which micro LED as chip and through chip scale packaging (CSP) process to design wide angle micro LED that achieve full width at half maximum (FWHM) of 180°. The prototype used a square packaged that with a flip chip. Chip length, width and height of 240um, 130um and 80um respectively, the structure of wide angle micro-LEDs is including flip chip as light source, side wall around chip, a light guide layer, and a diffusion layer. The light guide layer has a great correlation with the light extraction efficiency, the diffusion layer used to control the ratio of the transmittance and reflectivity rate. We analyze the thickness of light guide layer and diffuser layer from 0.1mm to 0.4mm and 0.1mm to 0.3mm, respectively. In which the optimized package structure of thickness of light guide layer of 0.4mm, thickness of diffusion layer of 0.2mm. The prototype shows that light extraction rate of 95%, central light intensity of 25.6%, peak angle at 66° and full width at half maximum (FWHM) of 180°. This design proposed for thin, flexible, and uniform surface light source.
Conference Presentation
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhi-Ting Ye, Hsiang-chiu Wu, and Hao-Chung Kuo "First optical design for wide angle micro LED without second lens", Proc. SPIE 11548, Optical Design and Testing X, 115480K (10 October 2020); https://doi.org/10.1117/12.2574621
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Optical design

Light sources

Waveguides

Diffusion

Lens design

Diffusers

RELATED CONTENT

VCSELs in the visible to IR as a light source...
Proceedings of SPIE (February 18 2014)
Active implant for optoacoustic natural sound enhancement
Proceedings of SPIE (February 08 2017)
Convertible 2D 3D display using an edge lit light guide...
Proceedings of SPIE (September 03 2015)

Back to Top