Paper
5 November 2020 Design of low distortion MWIR optical system with high resolution and large width
Author Affiliations +
Proceedings Volume 11568, AOPC 2020: Optics Ultra Precision Manufacturing and Testing; 115680E (2020) https://doi.org/10.1117/12.2575715
Event: Applied Optics and Photonics China (AOPC 2020), 2020, Beijing, China
Abstract
As to the need of low distortion MWIR optical system with high resolution and large width, the initial structure of the coaxial two-mirror and the relay optical system were calculated based on the aberration theory and Gauss’s optical imaging formula. According to the aberration auto-balance optimization of optical design software, the aspheric surface is introduced to correct residual aberration, and the compact requirement of infrared optical system was realized. Focal length 2000mm, F number 3, field of view 3°×0.5°, the operating wave band 3~5μm and 100% cold shied efficiency reached. High imaging quality was realized. The modulation transfer function of the system exceed 0.34 all over the field of view at the Nyquist frequency of 33lp/mm, and the relative distortion below 0.1%.The results of the design revealed the target depth that can be realized by the coaxial two-mirror system and relay optical system. The system can achieved a resolution 3.75m and a width of 26km.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yongdan Jia, Yunsong Nie, and Xiaohua Zhou "Design of low distortion MWIR optical system with high resolution and large width", Proc. SPIE 11568, AOPC 2020: Optics Ultra Precision Manufacturing and Testing, 115680E (5 November 2020); https://doi.org/10.1117/12.2575715
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Imaging systems

Distortion

Relays

Infrared imaging

Mirrors

Infrared radiation

Mid-IR

Back to Top