Paper
15 January 1990 Effect Of Zero Stress Aging On Mechanical Characteristics Of Optical Fibers
H. H. Yuce, J. P. Varachi Jr., T. Wei
Author Affiliations +
Abstract
The long-term mechanical reliability of optical fibers is controlled by their strength, fatigue resistance, and zero-stress aging behavior. Understanding the effect of the chemical environment under zero stress on the subsequent fracture strength of optical fibers is important because optical fibers in service are likely to encounter water and other chemical species while exposed to zero or low stress conditions. To determine the effect of zero stress aging on polymer coated optical fibers, we used several fibers which were coated with various UV-curable polymer coatings. The results clearly showed that the strength, fatigue resistance, and aging behavior varied significantly among these fibers. Strength reduction took place after aging in water. Such reduction was both temperature and time dependent and was also affected by the polymer coating. The initial degradation in strength may be partially or fully recovered through drying. However, the degree of recovery became less with increasing storage time at zero stress. A change in the fatigue resistance of these fibers, which was modified by the coating material, was also observed.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
H. H. Yuce, J. P. Varachi Jr., and T. Wei "Effect Of Zero Stress Aging On Mechanical Characteristics Of Optical Fibers", Proc. SPIE 1174, Fiber Optics Reliability: Benign and Adverse Environments III, (15 January 1990); https://doi.org/10.1117/12.963252
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

Platinum

Optical coatings

Resistance

Reliability

Failure analysis

Polymers

RELATED CONTENT

High-strength optical fiber for medical applications
Proceedings of SPIE (July 01 1991)
Fiber optic interconnects: physical design for reliability
Proceedings of SPIE (February 23 2010)
Indentation experiments on silica optical fibers
Proceedings of SPIE (February 01 1991)
Optical fiber coatings
Proceedings of SPIE (September 08 1993)

Back to Top