Piezoelectric transducer design and impedance tuning for concurrent ultrasonic power and data transfer

Ahmed Allam; Ananya Bhardwaj; Karim Sabra; Alper Erturk

doi:10.1117/12.2614635

20 April 2022 Piezoelectric transducer design and impedance tuning for concurrent ultrasonic power and data transfer

Ahmed Allam, Ananya Bhardwaj, Karim Sabra, Alper Erturk

Proceedings Volume 12043, Active and Passive Smart Structures and Integrated Systems XVI; 120430C (2022) https://doi.org/10.1117/12.2614635
Event: SPIE Smart Structures + Nondestructive Evaluation, 2022, Long Beach, California, United States

Abstract

Ultrasonic waves can be used to transfer power and data to low power electronic devices placed in inaccessible locations such as the human body, deep in the ocean, or in metallic enclosures. The upstream communication from the device can be transmitted using a minimal power by modulating the impedance of a piezoelectric transducer to switch between absorbing incident ultrasonic waves and completely reflecting it. The absorbed ultrasonic power in this configuration is supplied to an energy harvesting circuit for powering the device. Piezoelectric transducers are commonly optimized either for power applications only (narrow bandwidth and high sensitivity) or data applications only (broadband and low sensitivity). This work explores piezoelectric transducer design for simultaneous power and data transfer using acoustic and electrical impedance matching. A broadband transducer is designed to receive uninterrupted ultrasonic power at 1.3 MHz while transmitting upstream data at a different frequency band with a bandwidth of 300 kHz. The factors affecting power/signal reflection due to impedance mismatch are analyzed analytically, and an approach for simultaneous acoustic and electrical impedance matching is introduced to maximize the bandwidth and sensitivity. Several air-backed underwater transducers with different matching layers are fabricated, and their electrical and acoustic reflection as well as their electrical impedance are experimentally measured and compared to analytical predictions. A circuit for maximizing the bandwidth and sensitivity of the transducer for data transfer is then tested experimentally. Another circuit for achieving uninterrupted simultaneous power and data transfer using a single transducer is also implemented and tested.

Conference Presentation

Citation Download Citation

Ahmed Allam, Ananya Bhardwaj, Karim Sabra, and Alper Erturk "Piezoelectric transducer design and impedance tuning for concurrent ultrasonic power and data transfer", Proc. SPIE 12043, Active and Passive Smart Structures and Integrated Systems XVI, 120430C (20 April 2022); https://doi.org/10.1117/12.2614635

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available