Mirau-type coherence scanning interferometer with integrated vibration compensation

Hüseyin Serbes; Sebastian Hagemeier; Peter Lehmann

doi:10.1117/12.2624021

20 May 2022 Mirau-type coherence scanning interferometer with integrated vibration compensation

Hüseyin Serbes, Sebastian Hagemeier, Peter Lehmann

Proceedings Volume 12137, Optics and Photonics for Advanced Dimensional Metrology II; 1213707 (2022) https://doi.org/10.1117/12.2624021
Event: SPIE Photonics Europe, 2022, Strasbourg, France

Abstract

Coherence scanning interferometry (CSI) is a widespread optical measurement principle for inspection of surface topographies with height resolution down to the nanometer range. However, the corresponding depth scan procedure is sensitive to environmental disturbances. Thus, a highly controlled environment is required and close-to-machine or in-situ applications suffer from higher uncertainty or even failure of the measurement. Several vibration compensation approaches for CSI were introduced in the past decades. These can be mainly divided into active and passive techniques. However, no approach is known so far that compensates such environmental disturbances sufficiently. Thus, precise out of lab measurements are usually not possible. We present a Mirautype CSI system with vibration compensation, where vibrations in the longitudinal direction are detected by an interferometric distance sensor (IDS) integrated into the CSI setup. The interference images of the CSI are then rearranged according the distance values detected by the IDS. This enables a compensation of disturbances and further, precise measurements in close-to-machine environments as we show by measurements obtained in a mechanical shop floor. Furthermore, we demonstrate that a compensation of vibrations with frequencies up to 300 Hz and an amplitude of 2.45 µm is possible with our measurement setup.

Conference Presentation

Citation Download Citation

Hüseyin Serbes, Sebastian Hagemeier, and Peter Lehmann "Mirau-type coherence scanning interferometer with integrated vibration compensation", Proc. SPIE 12137, Optics and Photonics for Advanced Dimensional Metrology II, 1213707 (20 May 2022); https://doi.org/10.1117/12.2624021

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available