Paper
3 October 2022 Light source modeling for UltraViolet-C Light-Emitting Diodes (UV-C LEDs) with aid of fluorescent film
Author Affiliations +
Abstract
We perform the mid-field model of a UV-C LED with an arranged wavelength of around 275 nm by comparing the 2-dimension (2-D) gray-level image captured by a monochromatic CMOS and the corresponding simulated irradiance pattern. Owing to UV-C light, we propose using a fluorescent film to absorb UV-C light and re-emit light at a longer wavelength so that the 2-D gray level image can be captured. The calibration to approach the corrected gray level of image is presented. Consequently, we obtain the precise mid-field light source model. Moreover, the model is also applied for dome lens design and then compares the optical behavior with fabricated samples in measurement to evaluate its validity.
© (2022) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Thi Thu Ngoc Le, Shih-Kang Lin, Ching-Cherng Sun, Quang-Khoi Nguyen, Tsung-Hsun Yang, and Yeh-Wei Yu "Light source modeling for UltraViolet-C Light-Emitting Diodes (UV-C LEDs) with aid of fluorescent film", Proc. SPIE 12217, Current Developments in Lens Design and Optical Engineering XXIII, 122170G (3 October 2022); https://doi.org/10.1117/12.2632996
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Light sources

Calibration

Cameras

Near field optics

Lens design

Light

RELATED CONTENT

Characterization of SWIR cameras by MRC measurements
Proceedings of SPIE (May 29 2014)
Simulation of spectral confocal microscopy system
Proceedings of SPIE (July 26 2022)
New international recommendations on LED measurements
Proceedings of SPIE (September 26 1997)
Broadband white light laser combiner system
Proceedings of SPIE (September 02 2008)

Back to Top