Characterizing particle-based thermal storage performance using optical methods for use in next generation concentrating solar power plants

Javier Corona; Dallin Stout; Todd Otanicar; Nirmala Kandadai

doi:10.1117/12.2632268

3 October 2022 Characterizing particle-based thermal storage performance using optical methods for use in next generation concentrating solar power plants

Javier Corona, Dallin Stout, Todd Otanicar, Nirmala Kandadai

Author Affiliations +

Proceedings Volume 12220, Nonimaging Optics: Efficient Design for Illumination and Solar Concentration XVIII; 122200F (2022) https://doi.org/10.1117/12.2632268
Event: SPIE Optical Engineering + Applications, 2022, San Diego, California, United States

Abstract

Concentrating Solar Power (CSP) generation is an attractive option for low-emission power generation; however, the high costs of thermal storage associated with concentrating solar create a large barrier for their use and adaptation into modern life. Lowering their operation costs, while maintaining high thermal storage and transfer performance is essential. Solid particle-based heat exchange systems can reduce CSP cost but are often less efficient. Efforts to increase their performance have led to use of binary size particle mixes. Presented is an optical-based thermal analysis technique used to measure near-wall thermal conductivity of particle beds essential in determining their heat exchanger efficiency. Modulated Photothermal Radiometry is used to make dynamic temperature measurements, allowing for the extraction of the most relevant thermal properties like thermal conductivity, specific heat, and effusivity. The system uses a modulated laser source causing a damped periodic heat flux, resulting in a frequency and thermal property dependent surface temperature, of which is measured using radiometry. Lock-In techniques are used to extrapolate the amplitude of the signal. Plotting the amplitude against the root angular frequency allows for effusivity measurement by ratio to a known sample. Using specific heat measurements from literature and density measurements, the thermal conductivity of the particle mixes can be calculated. The simplicity of MPTR to probe through the depth of the bed is ideal for use in CSP for dynamic thermal performance monitoring.

Conference Presentation

Citation Download Citation

Javier Corona, Dallin Stout, Todd Otanicar, and Nirmala Kandadai "Characterizing particle-based thermal storage performance using optical methods for use in next generation concentrating solar power plants", Proc. SPIE 12220, Nonimaging Optics: Efficient Design for Illumination and Solar Concentration XVIII, 122200F (3 October 2022); https://doi.org/10.1117/12.2632268

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available