Presentation + Paper
3 October 2022 Influence of lens and perspective distortion on optical surface metrology instrumentation
Author Affiliations +
Abstract
For any surface metrology system that obtains measurement with the aid of an imaging system, distortion must be carefully scrutinized. Both intrinsic lens distortion and perspective distortion embed surface error distributions that skew the interpretation of resultant surface maps. Either displaces acquired information due to the imaging process. Here, we quantify the origins of distortion, its modeling philosophy, and the effects of its digital correction procedure. This study includes simulation for lens-distorted systems such as interferometers and perspective-distorted systems such as monoscopic fringe projection profilometry and deflectometry. Summarily, this study hopes to clarify differences in low-order shape between surface metrology instrument measurements in which surface maps were not rectified for distortion.
Conference Presentation
© (2022) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Henry Quach, Joel Berkson, Hyukmo Kang, Heejoo Choi, and Daewook Kim "Influence of lens and perspective distortion on optical surface metrology instrumentation", Proc. SPIE 12221, Optical Manufacturing and Testing XIV, 122210M (3 October 2022); https://doi.org/10.1117/12.2633090
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Distortion

Metrology

Imaging systems

Cameras

Image processing

Calibration

RELATED CONTENT


Back to Top