Paper
1 July 1990 Scanned-slot digital mammography
Author Affiliations +
Abstract
A scanned-slot digital radiography system is being developed for use in mammography. The system consists of a novel fiber-optic "reformatter" which couples a strip of phosphor material to a light amplifier and a specially designed CCD camera. The reformatter provides an excellent means of converting a slot-shaped image to a format more suitable for digitization. A mammogram is produced by scanning the system in steps across the breast from the chest wall to the nipple. The pixels are of dimension 56 μm by 49 μm at the detector input. Images are currently acquired using a 40 kV tungsten anode spectrum with a measured half-value layer of 0.82 mm Al. The limiting resolution [MTF(f)=O.05] in the scanning direction is 9.2 cycles/mm. The quantum interaction efficiency of the phosphor is 64%, and the low-frequency detective quantum efficiency (DQE) was measured to be 0.60 ± 0.07. The high-frequency DQE is superior to that of mammographic film-screen systems because of the ability to remove fixed pattern noise from images. Phantom images produced with the scanned-slot system, and with a state-of-the-art film screen mammography system were compared. The scanned-slot system demonstrated better contrast sensitivity using a lower mean glandular dose than the film-screen mammography system.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Andrew D. A. Maidment and Martin Joel Yaffe "Scanned-slot digital mammography", Proc. SPIE 1231, Medical Imaging IV: Image Formation, (1 July 1990); https://doi.org/10.1117/12.18808
Lens.org Logo
CITATIONS
Cited by 15 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Charge-coupled devices

Imaging systems

CCD cameras

Mammography

X-rays

Sensors

Digital mammography

RELATED CONTENT


Back to Top