New metrology technique for measuring the free shape of a patterned 300mm wafer held vertically

Juan M. Trujillo-Sevilla; Óscar Casanova-González; Alex Roqué-Velasco; Miguel Jesús Sicilia; Jose Manuel Ramos-Rodríguez; Jan O. Gaudestad

doi:10.1117/12.2661903

27 April 2023 New metrology technique for measuring the free shape of a patterned 300mm wafer held vertically

Juan M. Trujillo-Sevilla, Óscar Casanova-González, Alex Roqué-Velasco, Miguel Jesús Sicilia, Jose Manuel Ramos-Rodríguez, Jan O. Gaudestad

Author Affiliations +

Proceedings Volume 12496, Metrology, Inspection, and Process Control XXXVII; 124963G (2023) https://doi.org/10.1117/12.2661903
Event: SPIE Advanced Lithography + Patterning, 2023, San Jose, California, United States

Conference Poster

Abstract

On product overlay (OPO) is one of the most critical parameters for the continued scaling according to Moore’s law. Without good overlay between the mask and the silicon wafer inside the lithography tool, yield will suffer¹. As the OPO budget shrinks, non-lithography process induced stress causing in-plane distortions (IPD) becomes a more dominant contributor to the shrinking overlay budget². To estimate the process induced in-plane wafer distortion after cucking the wafer onto the scanner board, a high-resolution measurement of the freeform wafer shape of the unclamped wafer with the gravity effect removed is needed. Measuring both intra and inter die wafer distortions, a feed-forward prediction algorithm, as has been published by ASML, minimizes the need for alignment marks on the die and wafer and can be performed at any lithography layer3. Up until now, the semiconductor industry has been using Coherent Gradient Sensing (CGS) interferometry or Fizeau interferometry to generate the wave front phase from the reflecting wafer surface to measure the free form wafer shape^3,4,5. In this paper, we present a new method, Wave Front Phase Imaging (WFPI) for generating a very high-resolution wave front phase map of the light reflected off of the patterned silicon wafer surface. The wafer is held vertically to allow for the free wafer shape to be measured without having the wafer shape be impacted by gravity. We show data using a WFPI patterned wafer geometry tool that acquires 16.3 million data points on a 300mm patterned silicon wafer with 65μm spatial resolution using a total data acquisition time of 14 seconds.

Citation Download Citation

Juan M. Trujillo-Sevilla, Óscar Casanova-González, Alex Roqué-Velasco, Miguel Jesús Sicilia, Jose Manuel Ramos-Rodríguez, and Jan O. Gaudestad "New metrology technique for measuring the free shape of a patterned 300mm wafer held vertically", Proc. SPIE 12496, Metrology, Inspection, and Process Control XXXVII, 124963G (27 April 2023); https://doi.org/10.1117/12.2661903

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available