Translator Disclaimer
1 August 1990 High-brightness liquid-crystal light-valve projector using a new polarization converter
Author Affiliations +
Proceedings Volume 1255, Large-Screen and Projection Displays II; (1990)
Event: Electronic Imaging: Advanced Devices and Systems, 1990, Santa Clara, CA, United States
A high-brightness liquid crystal light valve (LCLV) projector, in which three amorphous Si TFT-addressed LCLVs are used, has been developed for laroe screen displays. By using a newly developed polarization converter, about twice the brightness has been realized compared to using a conventional sheet polarizer. The polarization converter principle is to efficiently convert an unpolarized light from a light source into a linearly polarized light, used to illuminate a twisted nematic LCLV. The LCLV has 240 x 756 pixels in the 4.3 inch diagonal area. High-brightness full-color images with 120 ft-L brightness have been obtained, when projected onto a 5.0 gain 80 inch diagonal screen using a 300W Xenon arc lamp.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Masao Imai, Mikio Sakamoto, Keiichi Kubota, Yuji Kato, and Nobuo Nishida "High-brightness liquid-crystal light-valve projector using a new polarization converter", Proc. SPIE 1255, Large-Screen and Projection Displays II, (1 August 1990);


Performance of NCAP projection displays
Proceedings of SPIE (August 01 1991)
Quadruple region extended displaying using mirror image
Proceedings of SPIE (October 22 2010)
Compact LCD projector with high optical performance
Proceedings of SPIE (August 18 1998)
New optical designs for large screen two and three...
Proceedings of SPIE (April 07 1995)
Light guide based optical engine for light-valve-projection
Proceedings of SPIE (September 29 2004)

Back to Top